Mounting Specifications

IS4910-00 / IS4911-00 Non-Decode Engine Dimensions

The -00 engine model includes two Ø .075" [1.9 mm] blind holes for mounting the engine with self-tapping screws. The mounting holes are located on the bottom of the unit with an additional keying location point for engine alignment.

Warning: The limited warranty (on page 31) is void if the following guidelines are not adhered to when mounting the engine.

When securing the engine with self-tapping screws:

•Use M2.2 x 4.5 Philips pan head, type AB, Steel, zinc clear, Trivalent self-tapping screws.

•Do not exceed 1.75 +0.5 in-lb [2.02 +6 cm-kg] of torque during screw installation.

•Use a minimum mount thickness of 0.3 mm.

•Use safe ESD practices when handling and mounting the engine.

Figure 4. IS4910-00 / IS4911-00 Dimensions

5