SCANNER OPERATION

The Scan Pattern Mode Select Button

There are two configurable scan pattern modes available with the MS3780.

•The primary scan pattern mode is the default scan pattern active when the scanner starts. By default, the primary scan pattern is set to all-scan-lines for omnidirectional reading.

•Pressing the scan pattern mode button (see figure below) activates the secondary scan pattern mode. By default, the secondary scan pattern is set to single-line mode for menu reading.

Please refer to the MetroSelect Configuration Guide for information on changing the default scan pattern settings.

To Change Scan Pattern Modes

1.To activate the secondary scan pattern, press and release the mode select button.

Press and Release the

Mode Select Button

Pattern Mode LED Switches to New Active Pattern

Figure 14.

Figure 15.

Activating a pattern mode when the scanner is out of its stand does not change the in-stand pattern mode. When the scanner is returned to the stand it will automatically revert to the most recent scan pattern selected during in-stand operation.

2.To re-activate the primary scan pattern, press and release the mode select button again.

13