INSTALLATION
Keyboard Wedge
1.Turn off the host device.
2.Plug the male
3.Disconnect the keyboard from the host device.
4.Connect the “Y” end of the PowerLink cable to the keyboard and the keyboard port on the host PC. If necessary use the male/female adapter cable supplied with the scanner for proper connections.
5.Plug the external power supply into the power jack on the PowerLink cable.
Check the AC input requirements of the power supply to make sure the voltage matches the AC
outlet. The outlet must be
located near the equipmentFigure 9. and be easily accessible.
6.Connect AC power to the transformer.
7.Turn on the host device.
When the scanner first receives power the white LED will flash, one blue LED will turn on and the scanner will emit one beep.
Powering the MS3780 directly from the host device can sometimes cause interference with the operation of the scanner or the computer. Not all computers supply the same current through the keyboard port. For this reason, Honeywell recommends using an external power supply. For additional information contact a customer service representative.
See Caution statement on page 5.
9