Honeywell MS5100 Series

DEFAULT SETTINGS

Many functions of the scanner can be configured or enabled/disabled.

The scanner is shipped from the factory configured to a set of default conditions.

All default parameters of the scanner have an asterisk ( * ) marked in the default

column. If an asterisk is not in the default column then the default setting is off or

disabled. Every interface does not support every parameter. A check

mark () will appear in the interface column if the interface supports the

parameter listed.

Parameter Default RS232 Light

Pen RS485SKBW USB Laser

Emulation

Normal Scan Mode *      

Continuous Scan Mode      

Blinky Scan      

Continuous Blinky Scan      

Custom (One Shot) Scan      

Manual Activation Mode      

CodeGate Active *      

CodeGate Inactive      

UPC/EAN *      

Code 128 *      

Code 93 *      

Codabar *      

Interleaved 2 of 5 (ITF) *      

MOD 10 Check on ITF      

Code 11      

Code 39 *      

Full ASCII Code 39      

Mod 43 Check on Code 39      

MSI-Plessy 10/10

Check Digit      

MSI-Plessy Mod 10

Check Digit *      

Paraf Support ITF      

S Applicable for IBM® Host applications.