Honeywell programmable thermostat Temperature Setpoint Overrides

63-2652—01 10

5. Press Not Occupied Heat.

6. Press up S or down T until the desired

temperature is displayed.

7. Press Not Occupied Cool.

8. Press up S or down T until the desired

temperature is displayed.

9. Press Run Schedule.

Temperature Setpoint

IMPORTANT

— Setup determines Occupied override

duration.

— Default duration is three hours.

NOTE: To cancel Override and immediately

return to the program, press Run

Schedule.

A TR23 setpoint knob can remotely adjust the

T7350 setpoint. This adjustment can be made

when the sensor is in override.

NOTES:

— During override, only occupied and

standby heat setpoints, and cool

setpoints are adjusted.

— The maximum adjustment is ±5 °F

(±3 °C).

— With a disconnected or failed TR23

or a T7350 set for local tempera-

ture sensing, offset is zero.

63-2652_A.fm Page 10 Monday, May 10, 2010 4:21 PM