Purpose and Content of this Addendum

This Addendum includes information required under the ATEX Directive regarding:

1.The appearance and meaning of each certification mark (CE Mark) that appears on the label(s) affixed to the product.

2.Instructions for installation and use of the product.

Information required for use of this product is given in:

34-ST-25-14B - ST 3000 Smart Transmitter Release 300 and Smart Field Communicator Model STS103, and

Installation information is given in

34-ST-33-39 - ST 3000 Smart Transmitter Release 300 and Smart Field Communicator Model STS103 Installation Guide,

of which this Addendum is a part.

Details regarding certification marks that appear in labeling for this product are given in this addendum.

Attention

The publications cited above and the functioning and construction (except for labeling) of the devices described therein are essentially unchanged. The purpose of this addendum is to provide details the purpose and appearance of the labels attached to each device under ATEX Directive 94/6/EC.

Attention

Before installing the equipment in a potentially explosive atmosphere, please read the information provided in this Addendum, which supports the ATEX certifications for this product.

CE Conformity

The ST 3000 Smart Pressure Transmitter is in conformity with the protection

 

requirements of the following European Council Directives: 94/9/EC, the Explosive

 

Atmospheres (ATEX) Directive, 89/336/EEC, the Electromagnetic Compatibility

 

(EMC) Directive, and the Pressure Equipment (PED) directive.

 

In conformity with the ATEX directive, the CE mark on the certification nameplate

 

includes the Notified Body identification number 0344 (KEMA 01ATEXQ3199)

 

adjacent to the EC Type Examination Certificate number.

 

In conformity with the Pressure Equipment Directive, models rated greater than 200

 

bar (2,900 psi) have an additional CE mark applied to the meter body data plate in

 

accordance with 97/23/EC, Article 15. Models rated at less than 200 bar have no CE

 

mark on the meter body data plate per 97/23/EC, Article 3, Section 3.

 

Deviation from the installation conditions in this manual may invalidate this product’s

 

conformity with the Explosive Atmospheres, Pressure Equipment, and EMC

 

Directives.

 

Conformity of this product with any other “CE Mark” Directive(s) shall not be

 

assumed.

 

 

2 of 10

34-ST-99-36 (Addendum to 34-ST-33-39)

10/04