TB7100A1000 MULTIPRO™ MULTISPEED AND MULTIPURPOSE THERMOSTAT
63-2675—03 16
PROGRAMMING
Table 7 shows default program settings.
Table 7. Energy-saving Default Program Settings.

Fan Settings

Auto: Fan runs only when heating/cooling system is on.
See the Fan Schedule section for more information.
On: Fan runs continuously.

System Settings

Heat: Thermostat controls the heating system.
Off: Both heating and cooling systems are off. Fan is turned
off.
Cool: Thermostat controls the cooling system.
Auto: Thermostat automatically changes between heat and
cool operation, depending on indoor temperature.

Programming Heating and Cooling Schedule

The thermostat can control up to four different schedule
periods per day:
OCC 1: Work arrival time. Period to keep space at a
comfortable temperature.
UNOCC1: Work exit time. Period to keep space at an
energy-saving temperature.
OCC 2: Second occupied period.
UNOCC2: Second unoccupied period.
NOTE: Available schedule times are at 15-minute intervals.

Editing Schedule

1. Press MORE
2. Press SCHEDULE.
3. Press EDIT.
4. Press SELECT DAY to select the days you wish to
schedule.
5. Press NEXT when finished selecting days
NOTES:
— Multiple days can be selected.
— To skip over a day, press the Up or Down arrow
keys.
— Checkmarks appear next to selected days. These
are scheduled with identical times and tempera-
tures.
Fig. 35. Initial schedule edit screen.
6. OCCUPIED 1 flashes, denoting the period that is about
to be edited.
7. Press NEXT, and the start time for that period flashes.
8. Change the start time by pressing the Up and Down
arrow keys.
9. Press NEXT to edit the heating and cooling setpoints.
10. Continue to cycle through the remaining periods and
make changes by pressing the NEXT key.
Fig. 36. Screen to edit existing settings.
11. When complete, press DONE. SAVING CHANGES
appears on the screen to indicate changes are being
saved to the day(s) modified.
12. To exit schedule without saving changes, press CANCEL
any time.

Setting Time

1. Press CLOCK.
2. Use arrows to set current time.
3. Press DONE.
IMPORTANT
The current day of the week should already be set
correctly. If not, see the Advanced Settings section to
set the day.
Schedule
Period Time
Setpoints
Heat Cool
Occ1 8:00am 70°F (21°C) 75°F (24°C)
Unocc1 10:00pm 55°F (10°C) 85°F (29.5°C)
Occ2 — — —
Unocc2 — — —
M22332
Mon
Tue
Wed
Thu
Fri
Sat
Sun
Select Day
Next Step Cancel
M23041
DAYS
SELECTED
NEXT STEP KEY
ADVANCES PERIOD,TIME,
HEAT AND COOL TEMPERATURES
SCHEDULE
PERIOD
HEAT OR COOL
TEMPERATURES
GO BACK KEY
GOES BACK TO THE
LAST SCHEDULE STEP
DONE KEY
EXITS AND SAVES
CHANGES MADE
TO SCHEDULE
DOWN ARROW
CHANGES TIME
AND
TEMPERATURES
UP ARROW
CHANGES TIME
AND
TEMPERATURES
AM
Go Back Next Done
Mon
Tue
Wed
Thu
Fri
Period
Occupied1 Unocc1
Occupied2 Unocc2