RAINFALL HISTORY
The rainfall history records will be automatically stored in the memory of the main unit. There are three historical records may be displayed – for the past hour, past day and past week.
To display any of available rainfall history reading, use any button on the front panel except the ALARM button. The display sequence is: LAST HOUR, LAST 24 HOURS, and
LAST 7 DAYS.
To clear the memory, press and hold MEMORY button on t he front panel for two seconds and all previously stored readings will be erased (all the historical records will display a default reading 0.00).
MAXIMUM AND MINIMUM TEMPERATURE The maximum and minimum record of the indoor and remote temperatures will be automatically stored in the memory of the main unit.
To display the minimum, maximum or the current reading press MEMORY button on the back panel.
To clear the memory, press and hold MEMORY button on the back for two seconds and all previously stored readings will be erased.
LOST COMMUNICATION
•If the main unit display line for the remote temperature sensor reading goes blank, press and hold the back DOWN ( 
) button for 2 seconds to begin a new signal search. If the signal still isn’t received, please make sure that:
•The remote temperature sensor is in its proper location.
•The distance between main unit and remote temperature sensor is not over 100 feet (30meters).
17
•The path between units is clear of obstacles. Shorten the distance if necessary.
•Fresh batteries are installed correctly in both remote temperature sensor and main unit.
•If there is no reception, please perform the following steps:
•Bring the main unit and remote temperature sensor close together.
•Remove four (4) small screws from the back of the remote temperature sensor with small Phillips screwdriver, and open the battery compartment.
•Remove the batteries from the battery compartment and reinstall them in the same manner. Remote sensor LED indicator will flash showing transmission of the signal.
•Remove the batteries from the main unit and reinstall them in the same manner.
•The remote temperature appeared on the main unit’s display will show that transmission is being received successfully.
•If the main unit display line for the remote rain gauge reading goes blank, press and hold the front DOWN ( 
) button for 2 seconds to begin a new signal search.
•If the signal still isn’t received, please make sure that:
•The remote rain gauge is in its proper location.
•The distance between main unit and remote rain gauge is not over 100 feet (30meters).
•The path between units is clear of obstacles. Shorten the distance if necessary.
•Fresh batteries are installed correctly in both remote rain gauge and main unit.
18
TRANSMISSION COLLISION
Signals from the other household devices such as wireless doorbells, home security systems, and entry control, may interfere with this product or cause temporary reception interruption. This is normal and will not affect the general performance of the product. The transmission and reception of the remote readings will resume once the interference subsides.
CALENDAR AND CLOCK DISPLAY MODES
Date is displayed in
MANUAL SETTINGS
CLOCK
•Press and hold MODE button for 3 seconds: the language letters will flash.
•Press UP ( 
) or DOWN ( 
) to change flashing letters.
•After the first value is set, press MODE button again to move to the next value
•Continue setting temperature in Celsius or Fahrenheit, year, month, date, calendar format, 12 or 24 hour time format, hour and minutes.
•Press MODE for the last time to return to the default mode (time of day with seconds) after the last parameter is set.
TIME ZONE
•Select Time Zone setting mode by pressing MODE button until the word “ZONE” will appear to the left of time display
•Press and hold MODE button until flashing“0:00” digits will appear prompting to set the desired time zone in
30 minutes intervals
19
ALARMS
HIGH RAIN ALARM
The high rain alarm for the past 24 hours can be set and displayed at any time by pressing ALARM button on the front panel.
To set the high rain alarm,
•Press the ALARM button on the front panel until the “ALARM HI” will appear on the upper right corner of the rainfall information line.
•Press and hold the ALARM button for 2 seconds or until the rainfall data digits will flash.
•Enter the rainfall amount you want to set the rain alarm for using the front panel UP ( 
) or DOWN ( 
).
•Press the ALARM button again to confirm and the high rain alarm will be set.
NOTE: Press and hold the MODE button on the front panel to display the rainfall reading in inches or mm.
TIME ALARMS
The Wireless Rain Gauge has three available time alarms – Weekday alarm ( 
W), Single alarm( 
S ) and Ice Warning Alarm
•If Weekday alarm is activated, it will sound at the set time and the alarm icon will flash Mondays through Fridays.
•If Single day alarm is activated, it will sound at the set time and the alarm icon will flash only for this specific day and will not activate on subsequent days.
•If Ice Warning Alarm is activated, in will sound at the set time and alarm icon will flash if the remote temperature for Channel One (1) will reach 35.6°F(+2°C) and below.
NOTE: Ice Warning Alarm can be set only if one or both of the Weekday or Single alarm are programmed.
20
