Honeywell TE329ELW Calendar Clock Display Modes, Date and Time Setting, Language Setting

CALENDAR CLOCK DISPLAY MODES

Both an alarm time and the calendar share the same section of the display. The next line displays the current time with seconds and the day of the week. The calendar is displayed in the month and day format.

If the alarm time is displayed, press MODE to display the calendar in month-day format. Each press on the MODE button will change the display between the time with the seconds and the time with the day of the week.

THE DATE AND TIME SETTING

1.Press MODE to change to the Hour/ Minute/ Weekday display mode. Select the Time Zone by pressing and holding the button for 3 seconds. Keep holding until the desired time zone (Pacific, Mountain, Central or Eastern) is displayed. A dark section on the map indicates the time zone selected.

2.Press and hold MODE for 3 seconds: The year digit

3.	will flash. Press				or	to select the year.
	Press MODE again: The month digit will flash.
	Press		or	to select the month.
4.	Press	MODE again: The date digit will flash.
	Press		or	to select the date.
5.	Press		MODE again: The “12 Hr” digit will flash to
	prompt for 12/24 hour format. Press						or	to select
6.	“12” or “24 Hr” for desired time format.
	Press MODE again: The hour digit will flash.
	Press		or	to select the hour.

7.Press MODE again: The minute digit will flash. Press or to select the minute.

LANGUAGE SETTING

The weekday may be displayed in one of five languages: English, Spanish, French, German, or Italian

1.After the minute is set, press MODE, and the weekday display will indicate the current preset language Example: “EN” for English.

2. Press or to set the desired language for the weekday display. The selection sequence is: “EN” for English, “SP” for Spanish, “FR” for French, “GE” for German, and “IT” for Italian.

˚C or ˚F TEMPERATURE DISPLAY SELECTION

1.When the weekday language is set, press MODE.

2.“˚F” will flash prompting the Fahrenheit display.

3. Press or to select desired temperature unit: “ ˚F ” for Fahrenheit or “˚C” for Celsius.

EXIT THE MANUAL SETTING MODES

*When the temperature display is set, press MODE to return to the default hours, minutes and seconds display.

*If no key is pressed for 30 seconds, the unit will return to default-time display.

VIEWING THE ALARM TIME SETTINGS

There are 3 different alarms available: Weekday alarm, Single alarm and the Pre-alarm. * Weekday Alarm

The alarm will sound and alarm “ W ” will flash at the at the set time Monday through Friday.

* Single Alarm

The alarm will sound and the alarm icon “ S ” will flash at the set time. This is useful for weekends, holidays or any day when you wish to wake up at a time other than your normal weekday alarm time. No need to reset your regular alarm time. This alarm can be bypassed during the set up if you choose not to use it.