Honeywell TE923W user manual Installation, Mounting hardware

4 screws for securing rain gauge to the flat surface;	Mounting hardware
4 screws for securing anemometer to vertical
surface
2m (6ft) USB cable	PC connection cable

Installation

The Honeywell Professional Weather Station TE923W operates at 433MHz radio frequency, so no wire installation is required between the main unit (receiver) and the remote weather sensors (transmitters).

The remote weather sensors include a thermo-hygrometer (temperature and humidity) sensor, UV (ultraviolet) sensor, anemometer (wind sensor) and a rain gauge (rain sensor). All data measured by these remote sensors is transmitted to the main unit wirelessly, with the operating range in the open area from 100 feet (30 meters) for anemometer and rain gauge; and up to 328 feet (100 meters) for thermo-hygrometer and UV sensors.

Remote UV sensor, anemometer and a rain gauge must be placed outdoors to measure weather elements.

Remote thermo-hygrometer can be placed indoors or outdoors, depending on the area where the temperature and humidity are intended to be measured. If you intend measuring outdoor temperature and humidity, place the remote sensor outdoors.

NOTE: It is critical to assemble and power up all of the remote weather sensors BEFORE setting up the main unit.

NOTE: It is critical to power up and test communication between all of the weather sensors and the main unit BEFORE permanently mounting them outside.

5