Honeywell TH1000, TH2000 n, o p, q

PRO TH1000 / TH2000 Series

ENGLISH

Follow the procedure below to personalize and

configure the thermostat according to the heating/

cooling system.

nPress S and T for three seconds. The display

will appear as shown on the right.

oPress S or T to change the option.

pPress S and T for three seconds to advance to

the next function.

qPress Run to exit the menu and save any

changes.

NOTE

: You will also exit the menu if you press

and

for three seconds when the last function is

displayed.

1 Applicable to programmable models (TH2110D & TH2210D) only.

2 Damage can occur if the compressor is restarted too soon after shutdown. This feature

forces the compressor to wait 5 minutes before restarting. During the wait time, the

message Cool On or Heat On flashes on the screen. When the safe wait time has elapsed,

the message stops flashing and the compressor turns on.

3 Applicable to programmable models (TH2110D & TH2210D) only.

Adaptive Intelligent Recovery™ allows the thermostat to “learn” how long your furnace or

air conditioner takes to reach the set temperature. Simply program the desired times and

desired temperatures into the schedule. The thermostat will determine when to activate

heating or cooling so that the desired temperature is attained at the desired time.

Installer setup

Function Default

setting Options

1 Temperature display format 0 0: Fahrenheit

1: Celsius

2Time display format100: 12-hour display

1: 24-hour display

3 Heating cycles per hour 5

2 to 6 cycles per hour

• 2: 30 min (steam, gravity)

• 3: 20 min (hot water, 90%+ high-efficiency furnace)

• 4: 15 min (gas or oil)

• 5: 12 min (gas or oil)

• 6: 10 min (electric)

4 Cooling cycles per hour 3 2 to 6 cycles per hour

5Compressor protection200: enabled (for systems without a compressor))

1: disabled (for systems equipped with a compressor)

6Adaptive Intelligent Recovery310: Off

1: On

Function

number

Option

number