PRO TH3210D Non-programmable Digital Thermostat
3
Remove the wallplate from the ther-
mostat as shown at left,then follow
directions below for mounting.
1 Pull wires through wire hole.
2 Position wallplate on wall,level and
mark hole positions with pencil.
3 Drill holes at marked positions as
shown below,then tap in
supplied wall anchors.
4 Place wallplate over anchors,insert
and tighten mounting screws.
Grasp top and bottom of wallplate
and pull to remove from thermostat.
Drill 3/16” holes for drywall.
Drill 7/32” holes for plaster.
Wall anchors
Mounting screwsWire hole
Wallplate installation