TH8320ZW
19 69-2485EFS—05
ENGLISH
In case of difficulty
Heating or cooling
system does not
respond
• Press SYSTEM to set system to Heat. Make sure the temperature is se t
higher than the Inside temperature.
• Press SYSTEM to set system to Cool. Make sure the temperature is set
lower than the Inside temperature.
• Check circuit breaker and reset if necessary.
• Make sure power switch at hea ting & cooling system is on.
• Make sure furnace door is closed securely.
• If “Wait” is displayed , the compressor prote ction timer is on. Wai t
5 minutes for the system to restart safely, with out damaging the
compressor.
Display shows
Fan Auto and On
or Auto and Circ
at the same time
• This is normal operati on. Auto indicates the ther mostat is following the
programmed fan setting. If Auto and On is show n, the fan is schedu led for
“On” during this perio d (see page 7).