VisionPROTM 8000 Touchscreen Programmable Thermostat
68-0280—01 18
0360 Heat Pump Auxiliary
Lockout
0—no a uxi li ary hea t lo cko ut.
40°F (4.5°C)
45°F (7°C)
50°F (10°C)
55°F (13°C)
60°F (15.5°C)
Shown if electric is
chosen for backup heat
source and outdoor
temperature sensor for
control is selected. (See
Advanced Features
section for more
information.)
0380 Indoor Dehumidification
Control
0—No indoor dehumidification control.
1—Dehumidification control activated.
Available on select
models.
If dehumidification control
is activated and auto-
changeover is selected in
Installer Setup Number
0300, the deadband
minimum is defaulted to
5°F (3°C) in Number
0310.
0500 Furnace Change
Reminder
0—furnace filter reminder off
1—10 run time days
2—30 run time days
3—60 run time days
4—90 run time days
5—120 run time days
6—365 run time days
Run time based on call for
fan.
0510 Humidifier Pad
Replacement Reminder
0—humidifier pad replacement reminder off
1—90 c a l e n d a r d a y s
2—18 0 c a l e nd a r d ay s
3—365 calendar days
—
0520 UV Lamp Replacement
Reminder
0—UV lamp replacement reminder off
1—365 calendar days
—
0530 Adaptive Intelligent
Recovery™
1—Adaptive Intelligent Recovery™ control is activated
(system starts early so setpoint is reached by start of
program period).
0—Conventional Recovery (system starts recovery at
programmed time)
—
0540 Number of Periods 2—two periods available (Wake and Sleep)
4—four periods available (Wake, Leave, Return and
Sleep)
Not shown if non-
programmable is
selected. 2 or 4 applies to
all days of the week.
0580 Minimum Compressor
Off Time
5—five-minute compressor off-time setting (factory
setting)
0, 2, 3, 4—other compressor off-time settings
—
0600 Heat Temperature
Range Stop
40-90—temperature range (1°F increments) of heating
setpoint.
Shown in 1/2 °C.
0610 Cool Temperature
Range Stop
50-99—temperature range (1°F increments) of cooling
setpoint.
Shown in 1/2 °C.
0640 Clock Format 12—12 hour clock (factory setting)
24—24 hour clock
—
Table 3. Installer Setup Menu. (Continued)
Installer Setup
Number Installer Setup Name Settings Notes