ZIO
®
/ZIO PLUS LCD WALL MODULES
17 63-2719—03
Completing the Setup and Configuration
For custom configurations, begin with “Custom Configurations
Only”, otherwise continue with “All Configurations”.

Custom Configurations Only

If you are customizing a configuration, use the Save to Library
button to save your configuration. Clicking the button displays
a pop-up window as illustrated in Fig. 25.
Fig. 25. Save to Library screen pop-up.

All Configurations

To complete the configuration process, perform the following
sections in this order:
1. “Preview”
2. “Confirm Memory Usage is within Limits”
3. “Finish the Configuration”
4. “Link Slots on the Wire Sheet” on page 18

Preview

Use the Preview button or Preview menu selection to see how
the wall module LCD screen will operate for your selected
configuration (see “Preview” on page16).

Confirm Memory Usage is within Limits

To view the current memory use information click on the
Memory Usage Details button. A new window opens and
displays a a bar graph indicating the percentage of current
memory used in each memory category.
Each of the memory categories should be below 100%. You
can also click on the Memory Usage button below the bar
graph to quickly view the percent used by each of the memory
categories in the last column of the table. See Fig.4 on
page 4 for an illustration. If necessary, go back and remove
unneeded categories, parameters, or Home screens.
If using multiple Zios on one Sylk bus, check Spyder Resource
usage also.

Finish the Configuration

Click the Finish button to commit all your changes to the
database, close the Configuration Wizard, and return to the
wire sheet.