Honeywell VG1200-QS Out-of-StandModes/Code Gate® Activation, Reread Delay

Out-of-Stand Modes/Code Gate® Activation

When the scanner is in the stand, bar codes are automatically read when they are in the scanner’s field of view. When the scanner is out of the stand, by default you must push the button on top of the scanner to read a bar code. Use the following commands to adjust how the scanner behaves when it is out of the stand.

Presentation Mode Out-of-Stand: When the scanner is not in the stand, it automatically detects bar codes, then scans and transmits the data. The laser turns off afterward. (If you are accustomed to a Voyager 9520, this setting is the same as the 9520’s default.)

Presentation Mode with CodeGate Out-of-Stand: When the scanner is not in the stand, it automatically detects bar codes and decodes them. However, the data is not transmitted until you press the button. The laser remains on briefly after the transmission. (If you are accustomed to a Voyager 9540, this setting is the same as the 9540’s default.)

Presentation Mode

Out-of-Stand

Presentation Mode

with CodeGate

Out-of-Stand

Reread Delay

This sets the time period before the scanner can read the same bar code a second time. Setting a reread delay protects against accidental rereads of the same bar code.

Medium Reread Delay