Set Date and Time Zone
Tap Start > Settings > Control Panel > Date/Time icon or tap the Date/Time in the taskbar.
Set Date, Time, Time Zone, and assign a Daylight Savings location on the VX6 after a warm boot or anytime.
There is very little functional change from standard desktop PC Date/Time Properties options. Adjust the settings and tap the OK button or the Apply button to save changes to the registry. Any changes take effect immediately.
Grab Time Utility
The GrabTime utility can be configured to synchronize the time with a local server during each reboot function.
Tap the Sync button to synchronize date and time with a networked time server. By default, the VX6 operating system first searches for a time server on the local intranet. If not found, it then searches the Internet for a time server. A connection to the Internet is required for this option.
Autolaunch Time-Sync
Start > Settings > Control Panel > VX6 Options > Communication tab
By default, TimeSync does not automatically run on the VX6. To enable TimeSync to run automatically on the VX6 using the GrabTime utility, check this checkbox.
Synchronize with a Local Time Server
By default, GrabTime synchronizes via an Internet connection. To synchronize with a local time server:
1.Use ActiveSync to copy GrabTime.ini from the My Device > Windows folder on the VX6 to the host PC.
2.Edit the copy of GrabTime.ini on the host PC. Add the local time server’s domain name to the beginning of the list of servers. You can optionally delete the remainder of the list.
3.Copy the modified GrabTime.ini file to the My Device > System folder on the VX6. The System/GrabTime.ini file takes precedence over the Windows/GrabTime.ini file. System/Grabtime.ini also persists after a coldboot; Windows/Grabtime.ini does not persist.