Mounting Dimensions

Depending on the option ordered, there are four or six mounting holes in the plate. Use the proper number of 1/4 bolts to secure the plate to the vehicle. Additionally, some mounting plates contain a provision for a separate RAM ball mount for a keyboard, illustrated by the dashed lines in the illustration below.

(Not to Scale)

Step 2 – Prepare Thor VX8

The Thor VX8 is delivered with one or two RAM balls installed depending on the configuration ordered.

If an integrated keyboard bracket is to be mounted to the rear of the Thor VX8, follow the procedure below. Otherwise, skip to the next step.

1.The Thor VX8 must be off and the power cord should not be attached during this procedure.

2.Place the Thor VX8 face down on a stable surface.

3.Remove the RAM ball from the back of the Thor VX8. The hardware attaching the RAM ball is not reused.

4.Install the 2 M5x6 screws in the holes shown below.

2-7