Hoover 1130 manual To Replace Throw Away Bags, When to Replace Belt

TO REPLACE THROW-

AWAY BAGS

Tip cleaner over, resting handle on the floor. Open bag cover of cleaner by turning latch in either direction. Lift bag cover. Hold throw-away bag by cardboard cover, twist outward, and remove. Discard used bag.

To attach new throw-away bag, hold bag with cardboard collar down and with arrows pointing toward front of cleaner. Push hole in cardboard firmly over tube, twisting until bag is secure. Be sure that throw-away bag is not extending outside of cover and that cover is in proper position on the gasket before latching.

THE BELT

The belt of your Hoover cleaner controls the speed of the agitator and is important for the efficient operation of your cleaner. Because of this, when buying a new belt, you should always insist on a gen- uine Hoover belt. Some other belts on the market, not manufactured

under Hoover design and quality controls, do not operate the agitator correctly and create undue stress which will damage your Hoover cleaner.

WHEN TO REPLACE BELT

Remove bottom plate from cleaner (see Fig. 1) and check from time to time to be sure the belt is in good condition. If it is stretched or cut, it should be replaced.

9