1. Assembly

Operate cleaning system only at voltage specified on power unit. This system is intended for house- hold use.

Grounding

Instructions

This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electric shock. This appliance is equipped with a cord hav- ing an equipment-grounding conductor and grounding plug (A). The plug must be plugged into an appropriate outlet

(B)that is properly installed and grounded in accordance with all local codes and ordinances (see page 5).

DANGER-

Improper connection of the equipment- grounding conductor can result in the risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is for use on a nominal 120 volt circuit and has a grounding plug that looks like the plug illustrated in sketch (A).

A Temporary adapter (C) may be used to connect this plug to a 2-pole recepta- cle (D) if a properly grounded outlet is not available. The Temporary adapter should be used only until a properly grounded outlet (B) can be installed by a qualified electrician. The green col- ored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.

1-1

(A)

Grounding Pin (B)

1-2Adapter

Tab for

Grounding

(C)Screw

Metal Screw

(D)

NOTE: In Canada, the use of a tempo- rary adaptor is Not Permitted by the Canadian Electrical Code.

Description

1-3

1. Motor Module

Low Voltage

7. Controls

See right for details

On/Off Switch

2. Motor Exhaust

Over Load Protector

6.Filtration

3. Pipe Inlet

Module

 

4.Utility Inlet

5.Dust Contiainer

3

Page 3
Image 3
Hoover Central Vacuum Systems owner manual Assembly, Grounding Instructions, Pipe Inlet