6.Attach belt to motor pulley. Replace bottom plate by first hooking it to center tab on inside of nozzle.
7.Reposition screws and front cover.
8.Make sure “bridge” across bottom plate opening covers belt. If belt is not covered, agitator is not correctly oriented in nozzle.
Agitator brush
Disconnect cleaner from electri- cal outlet.
To check condition of agitator brushes, move the edge of a card across agitator opening. Rotate agitator by hand. If brushes do not touch edge of card, replace the agitator.
Where to buy
The agitator may be purchased from your local Authorized Hoover Dealer or from a Hoover Factory Service Center.
Ask for HOOVER agitator complete with end caps, part No. 59139205
10
