Maintenance, Picking Up Spills | Hoover Hard Floor Cleaner manual

Cleaning Sealed Wood Floors

Your HOOVER ‘FloorMate’ Cleaner may be used to clean wood floors that have been sealed with a polyurethane coating and can be cleaned with water.

CAUTION: To prevent damage to wood floors, follow the flooring manufacturer’s cleaning recom- mendations.

If using cleaner on sealed wood floors, inspect floor surface for worn finish, bare wood or separat- ed joints. Do not use ‘FloorMate’ cleaner to wet clean sealed wood floors if any of these conditions exist.

9.To greatly enhance drying of the floor surface, release trigger and move wet control switch to the “WET PICKUP” setting.

10.To continue cleaning, move wet control switch down to “WET Scrub”. Repeat steps 7 – 9. Make sure all areas are completely dry. Ensure that no water remains on the floor.

NOTE: When switching between wet cleaning and wet pickup, it is not necessary to turn the cleaner off. Simply move the control switch back and forth between the two settings.

1.Inspect floor surface for worn fin- ish, bare wood or separated joints. Do not use your ‘FloorMate’ cleaner to wet clean the floor if any of these con- ditions exist.

2.Set cleaner for Dry Vacuuming operation and vacuum floor (see chart on Page 9).

3.Empty recovery tank (Figs. 2-16 through 2-20).

4.Fill solution tank with Machine For- mula OLD ENGLISH® Wood Floor Cleaning Concentrate and water, according to instructions for Figs. 2-8 through 2-12.

Do not use pine or solvent based detergents. Do not put any type of wax in your cleaner.

11.Empty the recovery tank or clean the filter when the motor sound becomes higher in pitch and there is a loss of suction (see “Automatic Shut-Off”, Page 7).

5.Set cleaner controls for “Wet” Cleaning (see chart page 9).

6.Dry hands and plug cleaner in to a properly grounded outlet.

7.Step on handle release pedal and lower handle to operating position; turn cleaner ON.

8.Push cleaner forward, squeeze trigger while pulling cleaner back- ward. Release trigger and push cleaner forward. Continue cleaning floor surface while releasing solution on the backward strokes only. This will allow for effective cleaning with small amounts of solution.

Overlap strokes by 1 inch to help pre- vent streaking.

Picking Up Spills

Your cleaner may also be used to pick up small liquid spills (1 quart or less, never to exceed 1/4 inch in depth) on non-carpeted floors.

Set Wet/Dry pedal in the WET Pick- up/Scrub position.

Set Wet Control switch to the “WET/DRY Pickup” position.

Do not use the cleaner to pick up flammable or combustible liquids or chemicals. Do not use the clean- er to pick up detergents that con- tain pine or solvent based ingredi- ents.

4. Maintenance

4-1

4-2

4-3

Cleaning the Nozzle

Turn cleaner OFF and disconnect from electrical outlet.

The cleaner’s nozzle (A) can be removed for easy cleaning.

Slide the two nozzle release latches	Remove the nozzle by pulling straight
(B) outward.	out.
	Rinse nozzle under running water.
	Remove debris from squeegee (C)
	and wipe with a damp cloth.

Hard Floor Cleaner specifications

The Hoover Hard Floor Cleaner is designed to bring a new level of clean to your hard surfaces, combining ease of use with advanced technology. Crafted for both efficiency and performance, this cleaner is an ideal choice for those who want to maintain the beauty of their floors without the hassle of traditional cleaning methods.

One of the standout features of the Hoover Hard Floor Cleaner is its lightweight design. Weighing significantly less than many competitors, this cleaner is easy to maneuver, allowing users to navigate around furniture and tight spaces with little effort. Its compact size makes it perfect for storage in smaller homes or apartments, ensuring that powerful cleaning doesn’t require a bulky machine.

In addition to its portability, this cleaner utilizes SpinScrub technology. This innovative system incorporates multiple brushes that rotate in different directions, effectively lifting dirt and grime from even the most stubborn surfaces. The brushes are gentle enough to protect your floors from scratches while delivering a deep clean that makes a noticeable difference.

Another notable characteristic of the Hoover Hard Floor Cleaner is its dual-tank system. This feature separates clean water from dirty water, ensuring that you are always using a fresh solution on your floors. With a capacity large enough to minimize the need for frequent refills, you can tackle larger areas without interruption, making it a time-saving option for busy households.

The cleaner also includes easy-to-use controls, allowing you to switch between cleaning modes effortlessly. Users can choose from various settings tailored for sealed hardwood, tile, or other hard floor types. The LED indicator lights keep you informed of the machine's status, letting you know when it’s time to empty the dirty water tank or refill the clean water.

Another advantage is the inclusion of a washable filter, making maintenance straightforward and economical. This not only prolongs the life of the cleaner but also aids in keeping it performing at its best.

With innovative features, advanced technology, and user-friendly design, the Hoover Hard Floor Cleaner is a reliable tool for anyone looking to maintain their hard surfaces with minimal effort. It's a comprehensive solution for achieving a thorough clean and protecting your investment in beautiful floors.

Hoover Hard Floor Cleaner owner manual Maintenance, Cleaning Sealed Wood Floors, Picking Up Spills

Models: Hard Floor Cleaner