The dishwasher is able to signal a series of faults in the display.

AUTOMATIC FAULT SIGNALS

FAULTS

CAUSE

SOLUTION

 

 

 

E2 appears on the display and

No water (inlet hose closed).

Turn off the dishwasher, open the

the alarm sounds.

 

inlet hose and reset the cycle.

 

 

 

E3 appears on the display and

The machine cannot drain water.

Check if the drain tube is bent or if

the alarm sounds.

 

the siphon or filters are clogged.

 

 

If the problem persists, contact

 

 

Customer Service.

 

 

 

E4 appears on the display and

Water leak

Check if the drain tube is bent or if

the alarm sounds.

 

the siphon or filters are clogged.

 

 

If the problem persists, contact

 

 

Customer Service.

 

 

 

E5 appears on the display and

Electronic temperature control fault.

Contact Customer Service.

the alarm sounds.

 

 

 

 

 

E6 appears on the display and

Electronic control fault.

Contact Customer Service.

the alarm sounds.

 

 

 

 

 

E8 or Ei appear on the display

The water heating element is not

Clean the filter plate.

and the alarm sounds.

working correctly or the filter plate is

If the problem persists, contact

 

clogged.

Customer Service.

 

 

 

THE WATERBLOCK SYSTEM

The waterblock system has been designed to improve the safety of your appliance, particularly when the machine is left unattended.

The waterblock system actually prevents flooding which might be caused by a machine malfunction or as a result of a fracture on the pipes.

How does waterblock work

The sump located in the base of the appliance collects any possible water leakage and operates a sensor which subsequently activates a valve placed under the water tap and stops any water from the supply even with the tap fully opened. If the box containing the electrical parts is damaged, remove the plug from the socket immediately.

To ensure perfect operation of the safety system, box “A” with the hose, should be connected to the tap as shown in figure “1”. The inlet hose should not be cut, as it contains parts under load. If the hose is not long enough for correct connection, it must be replaced with a longer one. The hose can be obtained from your Service Agent.

This dishwasher is also equipped with an anti-overflow safety device which, if water exceeds normal levels due to malfunctions, automatically blocks water flow and/or drains excess quantities.

A

Fig. 1

24

25