|
| Fig. 2 |
|
|
|
Technical data |
|
|
|
|
|
■ Max. load of dry laundry |
| 8 kg |
■ Water pressure |
| 0,05 ÷ 0,8 MPa |
Measurements |
|
|
■ Width |
| 60 cm |
■ Depth |
| 54 cm |
■ Height |
| 82 cm |
|
|
|
NB: For specifications regarding electrical data, see the data panel on the front of the washing machine (porthole area) - as shown in diagram above.
Appliance complies with European Directives 73/23/EEC and 89/336/EEC, replaced by 2006/95/EC and 2004/108/EC, and subsequent amendments.
SETTING UP + INSTALLATION
1 | Remove the polystyrene base and place the machine near |
its permanent position (diagram 1). |
Carefully cut through the hose retaining clip at the rear of the appliance (diagram 2).
Remove the 4 fixing screws marked (A) and remove the 4 spacers marked (B) (diagram 3).
2 | Cover the | 4 holes using the caps provided in the |
instruction | booklet pack (diagram 4). | |
|
|
|
34
WARNING:
DO NOT LEAVE THE PACKAGING WITHIN REACH OF CHILDREN AS IT IS A POTENTIAL SOURCE OF DANGER.
Apply the insulation sheet of corrugated material to the base as shown.
Use the 4 feet to level the machine with the floor: |
|
a) Turn the nut clockwise to release the screw adjuster on the foot. | A |
b) Rotate the foot to raise or lower it until it stands firmly on the |
|
ground. | B |
c) Lock the foot in position by turning the nut | |
|
C
26 | 27 |