
Although not necessary, the filter can be | Replace lid and filter on filter chamber. |
removed from the lid for cleaning. | Replace chamber on dirt cup. |
|
Pull filter off lid and tap bottom of filter.
To replace, firmly press filter onto lid until it stops.
E |
H |
Place bottom of cup behind tab (H) and press cup into cleaner.
Rotate dirt cup handle (E) up to lock cup in place.
Final filter
J |
Cleaning final filter
The final filter assists in returning clean air to the room.
Remove dirt cup.
Press latch (J) and remove filter grid.
K |
Lift out filter (K) and hand wash in cold water with a mild detergent.
Let filter air dry then reposition. Replace filter grid and dirt cup.
Should you want to replace this filter, ask for HOOVER part no. 38766008.
Do not operate cleaner without any of the filters in place.
Headlight replacement
What to buy
This cleaner uses a 12 volt, wedge base type 912 bulb, HOOVER part No. 27313107.
L
Disconnect cleaner from electrical outlet.
Remove dirt cup as described in Fig.
Insert a flat screwdriver into slot and remove the access door (L).
Pull old bulb straight out of socket. Push new bulb straight into socket until locked in place.
Excessive force is not required.
Snap access door into place.
Reposition dirt cup (Fig.
8