44
12) Replace the drip ring and agitator.
13) Move the ice making switch and then the power switch to the “ON” position. Place the
storage bin cover in position, and start the automatic icemaking process. Run the ice
dispenser until it stops automatically.
14) Move the ice making switch to the “FLUSH” position, and wait for flush process to begin
(60 seconds).
15) Pour clean, warm water carefully onto the bin liner, agitator, drip ring and into the
reservoir through the opening in the center of the storage bin to melt the ice and rinse
out the cleaning solution.
16) Move the power switch to the “OFF” position.
17) Wipe the storage bin cover and spouts (A) and (B) using a clean cloth containing the
cleaning solution.
18) Rinse the wiped parts with water. Be careful not to wet the bin control switch on the
storage bin cover.
CAUTION
Do not use ice produced with cleaning and sanitizing solutions. Be sure none
remains in the storage bin.