Special wash cycles and Options
Notes:
Optimum performance levels when using the “Fast wash” and “Express 30’” cycles can be achieved by respecting the specified number of place settings.
To reduce consumption even further, only run the dishwasher when it is full.
Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address: ASSISTENZA_EN_LVS@indesitcompany.com
Wash options*
The OPTIONS may only be set, changed or reset after the wash cycle has been selected and before the Start/ Pause button has been pressed.
Only the options which are compatible with the type of wash cycle set may be selected. If an option is not compatible with the selected wash cycle (see Table of wash cycles), the corresponding symbol flashes rapidly 3 times.
If an option is selected which is not compatible with another (previously selected) option, it will flash 3 times and switch off, while the most recently selected option will remain active. To deselect an option which has been set by mistake, press the corresponding button again.
Delayed Start option
It is possible to delay the start time of the cycle by a period of time between 1 and 24 hours:
1.Select the desired wash cycle and any other options required. Press the DELAYED START arrows to select when the wash cycle is to start (1h, 2h etc.)
2.Confirm the choice using the START/PAUSE button: the countdown begins and the display shows Begins in ...
3.Once this time has elapsed, the DELAYED START symbol switches off and the wash cycle begins.
To deselect the DELAYED START option, press the DELAYED START button until the text OFF appears.
The Delayed Start function cannot be set once a wash cycle has been started.
Option Multi-functional tablets (Tabs)
This option optimises washing and drying results.
When using
The
The use of tablets is only recommended for models having this option and it is not recommended with wash cycles which do not specify the use of
|
|
| Zone Wash | GB |
|
| |||
|
|
| This option makes it possible to carry out the wash | |
|
|
| ||
|
|
|
| |
|
|
| cycle in the selected rack only. Select the wash |
|
cycle and then press the ZONE WASH button: the selected |
| |||
rack lights up and the wash cycle starts in the selected rack |
| |||
only. Press the button again to deselect the option. |
| |||
The option is available with the following wash cycles: Intensive and Normal.
Select the option and the Intensive cycle to start the ULTRAINTENSIVE ZONE washing. This wash cycle is ideal for very soiled mixed loads, e.g. pans and saucepans, dishes with heavy encrustation or
Select the option and the Normal cycle to start the SAVING ZONE washing. This function makes it possible to reduce water and energy consumption, thus achieving excellent washing and drying results. Cycle duration is longer.
Changes in the cycles are shown on the display. For optimum results and a shorter operating time, water and energy consumption is increased.
Remember to load the crockery in the selected rack only.
Half load
If there are not many dishes to be washed, a half load cycle may be used in order to save water, electricity and detergent. Select the wash cycle and press the HALF LOAD button: the indicator light will illuminate.
Press the HALF LOAD button to deselect this option.
Remember to halve the amount of the detergent.
Extra Drying option
To improve the dryness level of the crockery, press the EXTRA DRYING button and the symbol will light up. If it is pressed again, the option will be deselected.
A higher temperature during the final rinsing and a longer drying phase improve the dryness level.
The EXTRA DRYING option results in a longer wash cycle.
Short Time option
This option can be used to reduce the duration of the main wash cycles while maintaining the same washing and drying performance levels.
Having selected the option, press the Short Time button. To deselect the option, press the same button again.
13
