Hotpoint AFAA 52 x AI manual Ice tray

Models: AFAA 52 x AI

1 12
Download 12 pages 21.67 Kb
Page 7
Image 7
Ice tray

!Do not open the door during freezing.

!If there is a power cut or malfunction, do not open the freezer door. This will help maintain the temperature inside the freezer, ensuring that foods are conserved for at least 9 -14 hours.

!If the room temperature drops below 14°C for an

extended period of time, the ideal temperature will not be reached in the freezer compartment and food preservation will be reduced.

Ice tray

GB

The fact that they are situated on the top part of the

 

freezer drawers ensures greater cleanliness: the ice no

 

longer comes into contact with the food placed inside

 

the freezer compartment; furthermore, the dripping of the

 

water during filling is avoided (a lid to cover up the hole

 

after filling with water is also provided).

 

1.Pull out the tray by pushing it up.

Check that the tray is completely empty and fill it with water through the opening provided.

2.Take care not to exceed the level indicated (MAX WATER LEVEL). Excess water prevents the ice cubes from dispensing (if this happens, wait for the ice to melt and empty the tray).

3.Turn the tray 90°: due to the connected compartments each mould fills with water (see diagram).

4.Close the opening with the lid provided and put the tray back, placing the top part in the corresponding housing and allowing it to drop in again.

5.When the ice has formed (minimum time approximately

8 hours) knock the tray against a hard surface and wet the outside so that the ice cubes come loose and take them out through the opening.

MAX

WATER LEVEL

WATER

MAX

LEVEL

 

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

7

Page 7
Image 7
Hotpoint AFAA 52 x AI manual Ice tray