Connecting the drain hose

• the supply voltage is included within the values indica-

EN

ted on the Technical Data Plate fixed on the machine.

 

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

•the socket is compatible with the washing machine’s plug. If this is not the case, replace the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING - THIS APPLIANCE MUST BE EARTHED.

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under-sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is placed over the edge of a basin or sink be sure the free end of the hose should not be underwater.

THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through partitions, units etc., please ensure that either:

!We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the applicable law;

•the socket is able to sustain the appliance’s maximum power load indicated on the Technical Data Plate fixed on the machine.

the plug is replaced by a fused 13 ampere rewireable plug bearing the BSI mark of approval.

or:

the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow

Earth

Blue

Neutral

Brown

Live

3

Page 2 Page 4
Page 3
Image 3
Hotpoint AQ113D 697 I manual Green & Yellow Earth Blue
Page 2 Page 4

AQ113D 697 I specifications

The Hotpoint AQ113D 697 I is a washing machine designed to offer convenience, efficiency, and innovative cleaning technologies for modern households. With its sleek design and user-friendly interface, this model quickly gains the attention of consumers looking for reliability in laundry care.

One of the standout features of the Hotpoint AQ113D 697 I is its large capacity drum, which can handle up to 11 kilograms of laundry. This makes it an ideal choice for families or individuals who tend to do larger loads, allowing for fewer washes throughout the week. Coupled with a maximum spin speed of 1,300 RPM, it ensures that clothes come out drier, reducing the time needed for drying.

The appliance is equipped with the latest technologies that enhance its washing performance. The Intelligent Sensor technology allows the machine to detect the load size and adjust the water and energy consumption accordingly. This not only helps in conserving resources but also contributes to lower utility bills.

Additionally, the AQ113D 697 I features a variety of wash programs tailored for different types of fabrics. From delicate woolens to heavily soiled work clothes, users can select the appropriate cycle to achieve optimal cleaning results. The Rapid Wash option is particularly beneficial for busy individuals, providing quick wash cycles that can clean lightly soiled clothes in as little as 30 minutes.

Another notable characteristic is the Eco Cycle, which minimizes energy consumption and ensures an environmentally friendly washing experience. This cycle helps to maintain a balance between efficiency and performance, making it a popular choice among eco-conscious consumers.

In terms of ease of use, the Hotpoint AQ113D 697 I includes a delay timer, allowing users to schedule their washes at convenient times. The digital display provides clear information about the selected program and remaining time, making it simple to monitor progress.

Safety is also prioritized in this model, with features such as a child lock to prevent accidental settings changes. The anti-flood protection system offers peace of mind, ensuring that any risk of leaks or spills is minimized.

Overall, the Hotpoint AQ113D 697 I is a versatile washing machine that combines practicality with advanced cleaning technologies, making laundry days less of a chore and more efficient for today's busy lifestyles.
Top Page Image Contents