Connecting the drain hose

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

• the supply voltage is included within the values i

ndicated on the Technical details table (see page 5);

EN

 

• the socket is compatible with the washing

 

machine's plug. If this is not the case, replace

 

the socket or the plug.

 

Your appliance is now supplied with a 13 amp fused plug

 

it can be plugged into a 13 amp socket for immediate

 

use. Before using the appliance please read the

 

instructions below.

 

WARNING - THIS APPLIANCE MUST BE EARTHED.

 

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under- sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is place over the edge of a basin or sink be sure the free end of the hose should not be underwater.

THE FOLLOWING OPERATIONS SHOULD BE

CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved

fuse to BS 1362 should always be used, and the fuse

cover re-fitted. If the fuse cover is lost, the plug must not

be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the

correct colour as indicated by the coloured marking or

the colour that is embossed in words on the base of the

plug. Replacements can be obtained directly from your

nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and

you should wish to re-route the mains cable through

partitions, units etc., please ensure that either:

the plug is replaced by a fused 13 ampere re-wearable

plug bearing the BSI mark of approval.

￿We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the applicable law;

•the socket is able to sustain the appliance's maximum power load indicated in the Technical details table (see page 5);

or:

the mains cable is wired directly into a 13 amp cable

outlet, controlled by a switch, (in compliance with BS

5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make

the pins unusable so that it cannot be accidentally

inserted into a socket.

Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow

Earth

Blue

Neutral

Brown

Live

3

Page 2 Page 4
Page 3
Image 3
Hotpoint aqm8l 29 l manual Following Operations should be, Carried OUT by a Qualified Electrician
Page 2 Page 4

aqm8l 29 l specifications

The Hotpoint AQM8L 29 L is a top-tier washing machine that embodies innovation, efficiency, and user-friendliness. As part of Hotpoint's robust lineup of home appliances, this model is designed to cater to modern laundry needs while delivering superior performance.

One of the standout features of the AQM8L 29 L is its impressive capacity. With a drum size of 9 kg, this machine can easily handle large loads, making it ideal for families or households with significant laundry demands. This capacity not only saves time by allowing you to wash more clothes in one go but also optimizes water and energy usage, contributing to environmental sustainability.

The AQM8L 29 L is equipped with a range of innovative technologies that enhance its performance. The washing machine uses the Intelligent Anti-Stain system, which automatically detects and eliminates tough stains. This feature ensures that your clothes maintain their vibrancy and cleanliness without the need for additional pre-treatment.

Another notable technology in this model is the Eco-Logic system, which adjusts the water and energy consumption based on the load size. This intelligent feature not only reduces resource waste but also lowers your utility bills, making it an economical choice for everyday use.

Moreover, the AQM8L 29 L offers a variety of washing programs tailored to suit different fabric types and levels of soiling. The quick wash option, for instance, allows you to wash small, lightly soiled items in just 30 minutes, providing great convenience for those on the go. Other specialized programs include settings for delicates, wool, and sportswear, ensuring that every garment receives the appropriate care.

The machine also includes a delay start feature, which allows you to set the washing cycle to begin at a time that suits you. This flexibility can help align laundry with your schedule, making it easier to manage your daily tasks.

In terms of user interface, the AQM8L 29 L features a modern, intuitive control panel that simplifies operation. Its clear display and straightforward controls make it easy to select the desired cycle and settings.

Additionally, Hotpoint prioritizes safety with features like Child Lock, which prevents accidental operation by little hands. The machine's spin performance is impressive, contributing to reduced drying times and ensuring that clothes come out less damp.

In conclusion, the Hotpoint AQM8L 29 L is a versatile, efficient, and user-friendly washing machine that meets the demands of contemporary households. With its smart technologies, ample capacity, and various washing options, it promises to be a reliable companion in tackling your laundry needs.
Top Page Image Contents