Hotpoint BCI45 D Ishwasher, Information For Test Labs, lower rack, Load cutlery basket, Detergent

Models: BCI45

1 20
Download 20 pages 39.87 Kb
Page 16
Image 16
INFORMATION FOR TEST LABS

D ISHWASHER

INFORMATION FOR TEST LABS

8 Standard Place Settings load (upper rack at top position)

lower rack

Load cutlery basket

upper rack

 

 

Detergent

Detergent specifically intended for use with dishwashers must be used. The dispenser must be refilled before the start of each wash cycle following the instructions provided in the "Programme Chart." The detergent dispenser is located on the inside panel of the door.

Loading the detergent

To open lid "A", press button "B". The cleaning detergent should be introduced into the two containers "C", and “D”. After pouring in the detergent, replace the lid, pressing down until it clicks.

The rinse aid.

This product makes dishes sparkle more as it improves their drying. The rinse aid container is situated on the inside of the appliance door; you should refill it when indicator light “D” shows that it is empty.

(If your dishwasher is fitted with a “low rinse aid” indicator light, fill the container up when the indicator light flashes or lights up).

Loading the rinse aid.

To open the dispenser, turn cap C anticlockwise. Take care when you pour in the rinse aid to avoid it overflowing. You can adapt the amount of rinse aid used by the dishwasher: regulate the adjuster F which you will find under lid “C”. There are 6 different settings; the normal dosage is setting 2.

B

 

D

C

D

 

 

 

15 gr.

 

5 gr.

 

AFC

Use the Normal or Daily wash cycles (See Programme Chart” in the instruction booklet)

14

Page 16
Image 16
Hotpoint BCI45 D Ishwasher, Information For Test Labs, lower rack, Load cutlery basket, Detergent, Loading the detergent