Levelling, Drain hose connection, Standpipe

D ISHWASHER

Installation

Choose where you want to install your dishwasher, you can place it so that its sides or back panel are side by side with furniture or up against the wall. The dishwasher is providedwithwatersupplyanddrain hoses, which can be directed towards the left or right to facilitate appropriateinstallation.

Levelling.

Once the appliance is positioned, adjust the feet by screwing them in or out depending on how high you want it and to level it so that it is horizontal. Make sure that it is not inclined more than 2 degrees. If the applianceislevel,itwill helpensure its correct operation.

Cold water connection.

Thiselectrichouseholdappliance should be connected to the water mainsusingthecoldwatersupply hose provided with the appliance only.Donotuseadifferenthose.In the event of replacements, use originalsparepartsonly.

Connect the cold water supply hose, and making sure that it is fastenedtightlyinplace. Ifthewater hosesareneworhavebeenoutof useforanextendedperiodoftime, let the water run to make sure it is clear and free of impurities before making the connection. If this precaution is not taken, the water inlet could get blocked, causing damagetoyourdishwasher.

Drain hose connection.

WARNING: Connect your dishwasher drain hose to pipes which connect to the foul drain system and not to surface water drains.

IMPORTANT: For the correct operation of your dishwasher, it is essentialtocomplywiththefollowing information:-

Standpipe:

Ensure that the hose is not pushed too far down the standpipe.

If the end of your drain hose is fitted with‘retainingflaps’,ensuretheyare insertedfullyintothestandpipe. This will prevent the pipe from jumping out during installation and use.

Sink Waste System:

For under sink drainage:

Before connecting the drain hose, remove any internal restrictions - This will prevent a build up of debris which could cause a blockage.

Remove any restrictions from the waste spigot and ensure that the sealingbungisremoved.Thehose should be routed, such that it is raised to a minimum height of 800mm(31/2”).

Height Adjustment

Insert the appliance into the cutout andthenadjusttheheightusingthe screws located on the front bottom part of the machine. Use a screwdriver to turn the screws in the clockwise or anti-clockwise direction to increase or decrease the height respectively.

Adjusting the back Feet

Inserttheapplianceintothecutout andthenadjusttheheightusingthe screwslocatedonthefrontbottom part of the machine. Use a screwdriver to turn the screws in the clockwise or anti-clockwise direction to increase or decrease theheightrespectively.

Condensation-proof tape.

On some models, a transparent condensation-proof adhesive tape has been provided.

It should be stuck onto the lower side of your wooden worktop to protect it from the formation of condensation.

When not provided, this tape can be requested as a spare part from authorised retailers.

DO NOT position the standpipe near an electrical outlet. ENSURE that the drain hose is not kinked and it is routed as shown in thediagram.

The standpipe should have a bore of at least 38mm (11/2”). It should be installed as shown, have a trap fitted and must discharge into the same drain system as your householdsink.

It MUST NOT be connected to a surface water drain.

NOTE: Ensure the sink outlet pipe has a minimum diamtere of 32mm.

1.Untie the end of the GREY drainage hose from the rear of the appliance.

2.Reposition the ‘Hooked End Support’ as required along the GREY drainage hose.

3.If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug.

Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood.

BFI620 specifications

The Hotpoint BFI620 is a reliable and efficient built-in dishwasher designed to meet the demands of modern households. With a sleek and contemporary design, this dishwasher seamlessly integrates into any kitchen decor while delivering powerful cleaning capabilities.

One of the standout features of the Hotpoint BFI620 is its impressive capacity. With room for up to 13 place settings, it is perfect for families or those who frequently entertain guests. The adjustable upper basket allows users to customize the interior layout, accommodating larger pots and pans while maintaining space for everyday dishes.

The BFI620 incorporates Hotpoint's innovative technologies designed to enhance performance and energy efficiency. One notable technology is the Smart Sensor, which automatically adjusts the water and energy consumption based on the load size and soil level. This capability not only ensures optimal cleaning results but also contributes to lower energy bills, making it an environmentally friendly option.

Another significant feature is its A++ energy rating, which signifies exceptional energy efficiency. This rating reflects Hotpoint’s commitment to sustainability and reducing environmental impact. Furthermore, the BFI620 boasts a noise level of only 47 dB, making it one of the quieter models on the market. Users can enjoy peace and tranquility in their homes without being disrupted by loud operation.

The Hotpoint BFI620 offers various washing programs to accommodate different types of loads. These include eco modes for lighter cleaning tasks and intensive modes for heavily soiled dishes. The quick wash option is perfect for when time is of the essence, providing a fast and efficient clean without compromising on performance.

For added convenience, the dishwasher is equipped with a delay timer, allowing users to set the wash cycle to start at a more convenient time, such as during off-peak energy hours. The digital display provides clear feedback on the selected program and remaining cycle time.

In conclusion, the Hotpoint BFI620 is a feature-rich built-in dishwasher that combines efficiency, flexibility, and advanced technology. Its spacious interior, energy-saving capabilities, and diverse washing programs make it an ideal choice for busy households looking to simplify their dishwashing routine while maintaining high standards of cleanliness. With a commitment to modern living, the Hotpoint BFI620 is an appliance that genuinely enhances the kitchen experience.

Hotpoint BFI620 Levelling, Drain hose connection, Standpipe, Sink Waste System, Height Adjustment

Models: BFI620