D ISHWASHER
Troubleshooting
Caution
-Do not forget that repairs should be carried out by a qualified specialist. Improper repairs can lead to considerable equipment damage, as well as danger to the user.
-The dishwasher must first be disconnected from the electricity supply before any repairs or other work can be carried out. Switch off at the mains socket and water supply and remove the plug.
Resolving minor problems yourself.
Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without having to call out a service engineer. Not only does this save costs but it also means the appliance is available for use again that much sooner. The following list of common occurences and their remedies should help you identify the causes of most problems.
If the dishwasher won't
start, check...
■Isthedishwasherpluggedinat the electricity socket and switchedon?
■Is there a power failure, check otherappliances.
■Checkthefuse.
■Is the water supply tap turned on?
■Isthewaterinlethoseconnected properly?
■Is the pressure of the water supplysufficient?
■Istheinlethosekinked?
■Is the filter on the water supply hoseblocked?
■Isthedishwasherdoornotclosed properly?
If water remains inside the
dishwasher, check...
■thedrainhoseisnotkinked.
■the drain syphon is not obstructed.
■the dishwasher filters are not clogged.
If the dishes are not being
cleaned properly, check...
■thecorrectamountofdetergent hasbeenadded.
■thereisregeneratingsaltinthe saltcontainer.
■the dishes have been loaded correctly.
■the selected programme is suitableforthetypeofdishesand thedegreeofsoiling.
■allfiltersarecleanandpositioned correctly.
■the spray arm nozzles are not obstructed.
■thereisnothingobstructingthe rotationofthesprayarms.
If the dishes fail to dry or | Error messages | Water load solenoid valve |
remain dirty, check... | Yourdishwasherisequippedwitha | malfunction alarm |
■ thereisrinseaidinsidetherinse | safety system which is able to de- | Ifthecode"A02"flashes,TURNthe |
aidcontainer. | tectoperatingfaults. | dishwasherOFFANDBACKON |
■therinseaiddispensersettingis Thesefaultsflashuponthedisplay AGAINafteroneminute.Ifthealarm
correct. | byseveralcodesconsistingoflet- | persists, first turn off the water tap |
■ the detergent being used is of | tersandnumbers. | toavoid anyfloodingandthencut |
goodqualityandhasnotlostits | Take a note of the codes, turn the | off the electricity supply and call |
effectiveness (for example, | applianceoffandcallHotpointServ- fortechnicalassistance. | |
throughincorrectstorage,with | icefortechnicalassistance. |
|
theboxleftopen). | Tap off alarm |
|
If the dishes show signs of | If after all the checks, the appliance | |
If the H2O code is flashing on the | stilldoesnotoperateortheproblem | |
streaking, staining etc. | display with a long series of pro- | persists, call Hotpoint Service (see |
check... | longed beeps, it means you have | KEYCONTACTS,backpage)and |
■therinseaiddispensersettingis forgottentoturnthewatertapon. informthemof:
notsettoohigh. | Turn knob “A” to OFF, turn on the | |
If there are visible traces | watertapandwaitapproximately20 | |
seconds before turning the appli- | (Mod.)andtherelativenumbers(S/ | |
of rust inside the tank, | ancebackon.Thewashcyclewill | N)writtenontheratingplate |
check... | startupagainafterafewminutes. | located on the inner edge of |
■ the cap off the salt container is | If you are not there when theH2O | the door. |
securely closed and that the | code appears, the appliance will |
|
watersoftnersettingiscorrect. | switchtoalarmmodeandthecode | Switch off at the mains socket |
■ thecorrectamountofdetergent | A06 will flash on the display. | and remove the plug. Turn off |
isbeingused.Certaindetergents | Turn knob “A” to OFF, turn on the | the water supply. |
can be more corrosive than | water tap, wait approximately 20 |
|
others. | secondsbeforeturningappliance |
|
■ the tank is made of steel and |
| |
thereforeanyrustmarksaredue | and the appliance will start up |
|
toexternalelements(fragments | again. |
|
ofrustfromthetankpipes,pots, |
|
|
cutleryetc.)Specialproductsare | Clogged filter alarm |
|
commerciallyavailabletoremove | Iftheapplianceisblockedandthe |
|
suchmarks. | code"A05"isflashing,thismeans |
|
| thefilteriscloggedbylargeparticles |
|
| of food residue. Turn the knob to |
|
| OFF,cleanthefilterthoroughlyand |
|
| repositionitinitsseat,thenturnthe |
|
| appliancebackon.Thewashcycle |
|
| will start up as normal after a few |
|
| seconds. |
|
13