INSTALLATION INSTRUCTIONS
LPG Conversion Instructions for Models W810, BG05
Read the Gas Hob instructions before conversion, installation and using the Gas Hob.
Contents of kit:
1Rapid burner injector marked 92 - 1 off
2
3Auxillary burner injector marked 55 - 1 off
Hotplate Burner Injector Change and Bypass Screw Adjustment
Ensure that the Gas Hob is disconnected from the gas and electricity supply (Fig.1)
1.Remove pan supports, burner caps,burner bodies and control knobs (Fig.2)
2.Remove each injector and replace with LPG injector using 7mm A/F hexagonal socket (Fig.3).
3.Turn each gas tap bypass screw fully clockwise using a small flat bladed screwdriver through the holes in the control panel.
The bypass screw is located to the side of the tap spindle (Fig.4).
14
