The machine is noisy.

GB

The machine wont spin properly.

The machine leaks from the dispenser.

The machine leaks (other than dispenser) .

The indicator lights on the console are flashing rapidly.

The machine smells.

The machine door cannot be opened .

Door Seal damaged at the bottom .

The water level is too low when the machine is washing.

There is too much foam.

After completing the programme, or before starting a programme, the machine has turned itself off (no lights).

General .

•There will always be some motor, pump and drum noise during spin.

•Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly. This is a safety feature to prevent damage. Out of Balance can be caused by washing a single heavy item (eg duvet, quilt, etc). - Try the programme again using a different load.

•The dispenser drawer is blocked with detergent and requires cleaning.

•The water pressure is too high and requires turning down - turn down the tap on the water supply pipe slightly and try again.

•The machine is tilting forwards - It must be level when in its final position.

•The fill hose is loose, check both the cabinet and tap ends.

•The fill hose is tight but still leaks, if so replace the rubber washers, or the fill hose is missing the rubber washer.

•The drain hose is not fixed in properly.

•Switch off the machine and unplug it, wait for approximately 1 minute and then switch it back on again If the problem persists contact the Technical Assistance Service.

•The machine requires a service wash. Run a 90 degree wash cycle with detergent and no laundry.

•The door will not open until the door lock indicator light goes out shortly after the program has finished.

•The door seal has drainage holes at the bottom - This is normal.

•The water level is correct if it can be seen at the bottom of the door

•The detergent is not suitable for machine washing (it should display the text 'for washing machines' or 'hand and machine wash' or the like).

•To comply with new energy saving regulations the machine is fitted with an automatic standby system. Press 'ON/OFF' button for 3 seconds to activate the machine, it can then either be switched off or a new programme selected.

•Your washing machine contains sensors that monitor progress during the wash cycle (eg: Water Levels, Temperatures, Out of Balance loads, Wash time/progress). Normally, if your machine successfully completes the cycle, there is unlikely to be anything wrong!

Remember, you will be charged for a service call for problems caused by incorrect installation, as listed above.

Not emptying contents from pockets may cause pump or drain blockages, or may damage the machine.

Do not wash items which do not have a wash label, or wash items that are not intended as machine washable.

￿$

Page 15 Page 17
Page 16
Image 16
Hotpoint BHWM129 manual
Page 15 Page 17

BHWM129 specifications

The Hotpoint BHWM129 is a washing machine that combines efficiency with advanced technology to deliver an exceptional laundry experience. Designed for modern households, this model is equipped with a range of features tailored to enhance both cleaning performance and user convenience.

One of the standout characteristics of the Hotpoint BHWM129 is its energy efficiency. With an impressive A+ energy rating, the machine minimizes energy consumption while still providing powerful cleaning capabilities. This not only helps reduce electricity bills but also contributes to environmental sustainability.

The BHWM129 boasts a generous 7kg capacity, making it an ideal choice for small to medium-sized families. This allows users to wash larger loads in a single cycle, saving both time and water. Additionally, the machine offers different washing programs to cater to various fabric types and levels of soiling. Options include Cotton, Synthetics, and Delicates, ensuring that each load is treated effectively.

A highlight of the Hotpoint BHWM129 is its innovative technologies designed to enhance cleaning performance. The Anti-Stain technology is particularly notable, as it helps actively remove tough stains without the need for pre-soaking. This feature is a game-changer for busy households, where time is often of the essence.

The machine also features a digital display that simplifies operation. This intuitive interface allows users to easily select desired programs and monitor the remaining time of the cycle. The Delay Start function is another user-friendly feature, enabling users to set the machine to start later, offering flexibility for busy schedules.

In terms of reliability, Hotpoint is known for creating durable appliances, and the BHWM129 is no exception. Constructed with robust materials, the washing machine is designed to withstand the rigors of daily use. Additionally, Hotpoint’s quality assurance processes guarantee a product that consistently meets high performance standards.

Finally, noise levels during operation are surprisingly low, making the BHWM129 suitable for open-concept living spaces. With its comprehensive array of features, advanced technologies, and focus on efficiency, the Hotpoint BHWM129 is an excellent choice for anyone seeking a dependable and high-performing washing machine that meets the demands of everyday life.
Top Page Image Contents