Hotpoint BS53, BS43 manual Electronic Programmer

Electronic Programmer

The programmer makes it possible to preset the oven and the		?
grill in terms of:
• delay start with a preset length of time for cooking;		When “auto” is lighted, it indicates that the length and end
• immediate start with a preset length of time for cooking;
•	timer.	cooking time have been preset to operate in automatic mode.
Button functions:		At this point, the oven will turn on automatically at 12:30 in
“: Timer with hour and minutes;		order to finish the cooking session within 30 minutes. When
		the oven is on, the m symbol (cooking pot) will appear on
$: Length of cooking time;
		the display for the entire length of the cooking process. The
%: End cooking time;
		$ button can be pressed at any time to display the setting
( : Manual change;
		for the length of the cooking time, while the %button can be
) : Change time (backwards);
		pressed to display the end cooking time.
*: Change time (forwards).		At the end of the cooking time, an acoustic signal will
How to Reset the Digital Clock		sound. Press any button it turn it off (except the ) and
After the appliance has been connected to the power source		* buttons).
or following a power outage, the clock display will begin to blink		Immediate Start Time with Preset Cooking Length
and read: 0:00
		When only the length of the cooking time is set (points 1 and 2
•	Press the $ and % buttons at the same time. Then use
		of the paragraph entitled, “Delayed Start Time with Preset Cook-
	(within 4 seconds) the ) and * buttons to set the	ing Length”), the cooking session starts immediately.

exact time.

Use the *button to move the time forwards.

Use the )button to move the time backwards.

The time can also be changed in the following two ways:

1.Repeat all of the foregoing steps.

2.Press the ( button, and then use the ) and * buttons to reset the time.

Manual Operation Mode for the Oven

After the time has been set, the programmer is automatically set to manual mode.

Note: Press the (button to return the oven to manual mode after every “Automatic” cooking session.

Delayed Start Time with Preset Cooking Length

The length and the end cooking times must be set. Let us suppose that the display shows 10:00.

1.Turn the oven control knob to the cooking setting and tem- perature desired (example: convection oven at 200°C).

2.Press the $ and the use (within 4 seconds) the ) and

*buttons to set the length of the cooking time. Let us

suppose that 30 minutes was set for the length of the cook- ing time. In this case,+the display will show:

Release the button, and within 4 seconds, the current time will reappear with the m symbol and “auto.”

3.Press the % button, and then use the ) and * buttons to set the end cooking=time. Let us suppose that it is 13:00

4.Release the button and the display will show the current time within 4 seconds:

Cancelling a Preset Cooking Time

Press the $button, and,use the )button to set the time to:

Then press the manual cooking mode button (.

Timer Feature

The timer can be used to count down from a given length of time. This feature does not control when the oven comes on or turns off, but, rather, it only emits an acoustic signal when the preset time has run out.

Press the “button, and,the display will read:

Then use the *and )buttons to set the desired time. Release the button, and the timer will start at that second. The display will show the current.time

At the end of the preset time, an acoustic signal will sound, which can be turned off by pressing any button (except the * and ) buttons), and the “ symbol will turn off.

Changing and Cancelling Settings

•The settings can be changed at any time by pressing the corresponding button and using the *or )button.

•When the length setting for the cooking time is cancelled, the end cooking time setting is also cancelled, and vice versa.

•When in automatic cooking mode, the appliance will not accept end cooking times prior to the start cooking time pro- posed by the appliance itself.

7