Installation

These instructions are intended for the qualified technician installing the appliance in order to insure that the installation, adjustments and maintenance procedures are performed correctly and comply with the regulations currently in effect.

Important: the appliance must be disconnected from the power supply before making any adjustments or performing any maintenance, etc.

The appliance is Type Y and therefore can be installed alongside of cabinets which are higher than the surface of the worktop. The following precautionary measures should be observed in order to ensure proper installation:

a)Hoods must be installed in compliance with the required specifications contained in the instruction manual for the hood itself.

b)The appliance can be installed on any counter top as long as it is 600 mm or more in width and resistant to temperatures of up to 100°C. The dimensions and the position of the hole are shown below.

These measurements must absolutely be observed in so far as improper installation can cause the surrounding surface areas to overheat. It is recommended that the appliance be installed at a distance of at least 55 mm from the back wall or other vertical surfaces to ensure that the air circulates properly over the cooking area and to avoid overheating the surrounding surfaces. A seal or gasket is provided with the appliance, make sure that it adheres properly to the bottom part of the appliance frame. The seal must be fitted properly around the entire perimeter of the appliance and especially along the corners in order to create a seal between the work top and the appliance itself so as to prevent spills or splashes from leaking into the cabinet below.

The appliance must be fitted into the worktop using the fixing clamps - see diagram.

Very important

It is essential to install the appliance on a totally flat surface. Any damage caused due to incorrect fitting may alter the characteristics or impair performance.

Insert the appliance into the hole, pressing firmly around the frame to make it adhere to the worktop.

7

Page 7
Image 7
Hotpoint E3FX manual Installation, Very important

E3FX specifications

The Hotpoint E3FX stands out in the realm of modern refrigeration, designed to combine style with innovative technology. Aimed at households looking for efficiency and convenience, the E3FX offers multiple features that cater to contemporary lifestyles.

One of the standout characteristics of the Hotpoint E3FX is its impressive capacity. With a spacious interior, this refrigerator is ideal for families and individuals who require ample storage space for their groceries. The flexible shelving system allows users to adjust the height of shelves to accommodate taller items, while the large vegetable drawers keep fresh produce organized and accessible.

Energy efficiency is a key focus of the E3FX. It is designed to minimize energy consumption, contributing to both cost savings on utility bills and a reduced environmental footprint. The refrigerator carries an energy rating that underscores its commitment to sustainability, ensuring users can enjoy modern features without worrying about their energy usage.

The E3FX also boasts advanced cooling technologies. With a multi-air flow system, cold air is evenly distributed throughout the refrigerator, ensuring that all food items, from dairy to vegetables, remain at optimal temperatures. This technology helps to prolong food freshness, reducing waste and encouraging healthier eating habits.

Maintaining cleanliness and hygiene is made easier with the antibacterial protection feature. The inner walls of the refrigerator are treated to inhibit the growth of bacteria, providing peace of mind and promoting a safe environment for food storage.

A notable feature of the Hotpoint E3FX is its practical LED lighting, which illuminates the interior efficiently and stylishly. This not only enhances visibility but also saves energy compared to traditional lighting options.

In terms of design, the Hotpoint E3FX presents a sleek and modern aesthetic that can complement any kitchen decor. Available in various finishes, it adds a touch of elegance while maintaining functionality.

Additional features include adjustable thermostats, door alarms, and frost-free technology, which prevents ice buildup and makes maintenance hassle-free. With its blend of style, functionality, and advanced technologies, the Hotpoint E3FX is a top choice for anyone looking for a reliable refrigerator that aligns with the demands of modern life.

In summary, the Hotpoint E3FX embodies a thoughtful approach to food storage, combining spaciousness, energy efficiency, and advanced cooling features to meet the needs of today's consumers.