Electrical Connection

Electrical Connection

THIS APPLIANCE MUST BE EARTHED.

The installation procedure must be carried out by a qualified electrician.

The electrical safety of this appliance is guaranteed only if the appliance is correctly earthed in compliance with the standards of electrical safety.

The manufacturer can under no circumstances be considered responsible for any damage that might occur due to incorrect earthing of the hob.

The electric hob is not supplied with a power supply cord because the type of cord used depends on the type of electrical connection (see following diagram). Open the terminal box, following the instructions illustrated in the diagram below:

2

1 2

1

3

 

4

 

5

V

Connecting the supply cord to the electrical mains: The hob must be connected to the mains by a double pole mains switch, which must have a minimum 0f 3mm space between the contacts, correctly fused with a capacity appropriate to that shown on the hob Rating Plate. All electrical wiring from the consumer unit to the appliance, via the switched double pole cooker outlet, must be of an acceptable type and current rating as above.

The supply cord should conform to BS6004 conductor size 4mm2, must be positioned so that no part of it reaches a temperature of 50°C above room temperature. The electrical installation must comply with the IEE Regulations, Building Regulation & local By-Laws.

Before making the connection, make sure that:

•the limiter switch (fuse) and the residual wiring can support the appliance load (see the rating plate).

•the mains system is properly earthed in compliance with current regulations and provisions.

•there is easy access to the socket or the double pole switch after the appliance is installed.

IMPORTANT:

If the hob is installed above a built-in oven, the electrical connection for the hob must be independent of that for the oven, both for safety reasons and to facilitate the removal of the oven for maintenance, repair etc.

IMPORTANT POINTS:

Your hob is supplied with a special connection cable.

If ever the cable is damaged it should be replaced by an authorised service engineer only.

Disconnect the hob form the electrical supply before any work is carried out.

Electrical Connections:

Supply cable installation

The electric hobs are supplied without a cable. Use a cable: 4mm2

•open the teminal box by removing the "V" screw and taking off the cover.

•Fix the cable in place with the "F" cable clamp, close the lid and fasten it with the "V" screw.

1

2

3

4

5

 

•

•

•

•

 

 

•

•

 

 

 

L

 

 

 

N

 

Voltage and frequency of power supply:

230-240V

50-60Hz

7000W

V

1

2

3

4

5

 

 

 

 

F

9

Page 8 Page 10
Page 9
Image 9
Hotpoint EC604 Electrical Connection, Important Points, Supply cable installation, Voltage and frequency of power supply
Page 8 Page 10

EC604 specifications

The Hotpoint EC604 is an advanced built-in electric cooker that epitomizes the blend of innovation, performance, and ease of use. Designed to meet the needs of modern households, it boasts several features and technologies that elevate cooking experiences.

One of the standout features of the Hotpoint EC604 is its powerful ceramic hob, which offers rapid heating and precise temperature control. The ceramic surface is sleek and easy to clean, providing a striking aesthetic that complements any kitchen décor. With four cooking zones, users can accommodate a variety of pots and pans, making meal preparation more efficient.

The oven is a major highlight of the EC604, featuring a generous capacity that allows for versatile cooking options. Its multifunctional design enables users to bake, roast, and grill, catering to diverse culinary needs. The incorporation of an efficient fan system ensures even heat distribution, resulting in perfectly cooked meals every time. Additionally, the oven is equipped with a thermal grill, which is ideal for achieving that crispy finish on meats and vegetables.

Energy efficiency is another pivotal characteristic of the Hotpoint EC604. It operates at a high efficiency rating, which not only lowers energy consumption but also contributes to cost savings on utility bills. The eco-friendly design is a nod to contemporary environmental considerations, allowing users to contribute positively to sustainability efforts while still enjoying powerful cooking performance.

Safety features are also paramount in the Hotpoint EC604. It comes with child safety locks and auto shut-off mechanisms, which provide peace of mind for families and individuals alike. The appliance is constructed with durable materials designed to withstand the rigors of everyday cooking.

In terms of usability, the EC604 has an intuitive control panel, allowing users to operate the oven and hob easily. Clear indicators and settings make it straightforward for both novice and experienced cooks to navigate, ensuring an enjoyable cooking experience.

Overall, the Hotpoint EC604 stands out as a reliable and efficient cooking solution. With its innovative technologies, user-friendly design, and commitment to safety and energy efficiency, it is an excellent choice for those looking to enhance their culinary capabilities while enjoying modern conveniences. Whether baking a cake or preparing an elaborate roast, the Hotpoint EC604 promises to deliver exceptional results every time.
Top Page Image Contents