Hotpoint FDEL 3101 Experience Wash options, Half load, Multi-functional tablets, Delayed start

Models: FDEL 3101 Experience

1 16
Download 16 pages 53.57 Kb
Page 9
Image 9
Wash options

Wash options

The OPTIONS may only be set, modified or reset after the wash cycle has been selected and before the Start/ Pause button has been pressed.

Only the options which are compatible with the type of wash cycle set may be selected. If an option is not compat- ible with the selected was cycle (see Table of wash cycles), the corresponding LED flashes rapidly 3 times.

If an option is selected which is incompatible with another option or wash cycle selected previously, the incompat- ible option light will flash 3 times and switches off, while the most recently selected setting remains lit.

To deselect an option which has been set by mistake, press the corresponding button again.

Half load

If there are not many dishes to be washed, a half load cycle may be used in order to save water, electricity and detergent. Select the wash cycle and press the HALF LOAD button: the indicator light will illuminate.

Half load Remember to halve the amount of detergent.

Multi-functional tablets It is better to use powder detergent in this case.

Delayed start This option is incompatible with the following wash cycle: Speed wash.

Multi-functional tablets

This option optimises washing and drying results.

EN

Delayed start

It is possible to delay the start time of the wash cycle by 3,

6 or 9 hours.

1:After selecting the desired wash cycle and any other options, press the DELAYED START button. the indicator light will illuminate.

2:Select the desired delay time by pressing the Delayed Start button repeatedly; the wash phase (3 hours), the dry- ing phase (6 hours) and end (9 hours) indicator lights will illuminate in succession.

If the Delayed Start button is pressed again, the option is deselected and the indicator light switches off.

3. The countdown will begin once the Start/Pause button has been pressed. The selected delay period indicator light flashes and the Start/Pause button stops flashing (the light becomes fixed instead).

3. Once this time has elapsed, the DELAYED START indicator light switches off and the wash cycle begins.

Manual background The Delayed Start function cannot be set once a wash cycle has been started.

*Only available in selected models.

When using multi-functional tablets, press the MULTI- FUNCTIONAL TABLETS button. The corresponding indicator light will illuminate. The “Multi-functional tablets” option results in the lengthening of the wash cycle.

Manual background The MULTI-FUNCTIONAL TABLETS option remains set for subsequent wash cycles if it is not deselected.

Manual background The use of tablets is only recommended when the MULTI-FUNCTIONAL TABLETS option is available.

Manual background This option is not recommended for use with wash cycles which do not specify the use of multi-functional tablets (see Table of options).

 

A

B

C

Table of

Delay

Half

Multi-

functional

options

Timer

Load

 

 

 

Tablets

Super Wash

Yes

Yes

Yes

Normal

Yes

Yes

Yes

Daily A 60

Yes

Yes

Yes

Prewash

Yes

Yes

No

Eco

Yes

Yes

Yes

Speed 25’

Yes

No

Yes

Delicate

Yes

Yes

Yes

9

Page 9
Image 9
Hotpoint FDEL 3101 Experience manual Wash options, Half load, Multi-functional tablets, Delayed start