Installation

 

! Before operating your new appliance, please read

GB

these operating instructions carefully. They contain

 

important information for safe use, installation and care

 

 

of the appliance.

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of the

 

appliance.

 

Positioning and connection

Positioning

1.Place the appliance in a well-ventilated humidity-free room.

2.Do not obstruct the airflow under and behind the appliance. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy. Also, ensure the appliance is far away from any sources of heat (direct sunlight, cookers etc.)

3.For best performance in cool locations, position the appliance so that the plastic spacers on the condenser are nearly touching the room wall. (The condenser is the black radiator at the back of the appliance.) Note however, that this appliance should not be located in rooms where the ambient falls below 10°C for long periods of time.

Electrical connections

After transportation of the appliance, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located inside the appliance. (e.g. 150 W).

•The voltage must be in the range between the values indicated on the data plate located inside the appliance. (e.g. 220-240V, 50Hz).

•The socket is compatible with the plug of the appliance.

If the socket is incompatible with the plug, ask an authorised technician to replace it (see After Sales Service). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see After Sales Service).

!The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13Amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

-The plug is replaced by a fused 13amp re-wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

2

Page 1 Page 3
Page 2
Image 2
Hotpoint FFP187MG, FFP187MP operating instructions Installation, Positioning and connection, Electrical connections
Page 1 Page 3

FFP187MP, FFP187MG specifications

The Hotpoint FFP187MP and FFP187MG are advanced freestanding fridge freezers designed to meet modern households' storage needs while providing energy-efficient performance. These models have been engineered to blend functionality with style, making them an ideal addition to any kitchen.

One of the standout features of the FFP187MP and FFP187MG is their generous storage capacity. Both models come with a spacious 272 liters of total storage, consisting of a roomy fridge section and a well-organized freezer compartment. This ample capacity allows families to store a significant amount of fresh and frozen food, accommodating everything from weekly grocery hauls to last-minute meal prep.

The fridge compartments are equipped with adjustable glass shelves, which not only maximize storage flexibility but also make it easier to create space for taller items such as bottles and large containers. The models include crispers specifically designed to keep fruits and vegetables fresh for longer, maintaining optimal humidity levels.

In addition to their storage capabilities, the FFP187MP and FFP187MG incorporate advanced cooling technologies. The Dynamic Cooling System ensures even temperature distribution throughout the fridge, preventing hot spots and ensuring that food stays fresh longer. The models feature an A+ energy rating, meaning they consume less electricity compared to conventional fridge freezers, making them a better choice for environmentally conscious consumers.

Both models also come with a frost-free freezer compartment, eliminating the need for manual defrosting. This feature provides convenience and saves time while ensuring that ice build-up is minimized and preserves valuable storage space.

The design is another highlight of the FFP187MP and FFP187MG. Their sleek, modern aesthetic fits seamlessly into various kitchen décors. The FFP187MP variant sports a classic white finish, while the FFP187MG offers a charming metallic grey, ideal for adding a contemporary touch to your space.

Additional features include an interior LED lighting system that illuminates the fridge without generating excess heat, enhancing visibility without compromising energy efficiency. These fridge freezers also come equipped with user-friendly controls that allow for precise temperature adjustments and settings.

In summary, the Hotpoint FFP187MP and FFP187MG combine innovative technologies, generous storage capacity, and energy efficiency, making them standout choices for those looking to enhance their kitchen with reliable refrigeration solutions.
Top Page Image Contents