Burners and Nozzle Specifications
Table 1 |
|
|
|
|
| Liquid Gas |
|
| Natural Gas | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
Burner | Diameter | Thermal power | Nozzle |
| Flow* | Nozzle |
| Flow* | ||||
| (mm) | kW (p.c.s.*) | 1/100 | 1/100 |
| g/h | 1/100 |
| l/h | |||
|
| Nomin. |
| Ridot. | (mm) | (mm) | *** |
| ** | (mm) |
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Fast (R) | 100 | 3,00 |
| 0,70 | 41 | 86 | 218 |
| 214 | 116 |
| 286 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Semi Fast (S) | 75 | 1,90 |
| 0,40 | 30 | 70 | 138 |
| 136 | 106 |
| 181 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Auxiliary (A) | 55 | 1,00 |
| 0,40 | 30 | 50 | 73 |
| 71 | 79 |
| 95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Supply | Nominal (mbar) |
|
|
| 37 |
| 20 | |||||
Minimum (mbar) |
|
| 20 |
| 25 |
| 17 | |||||
Pressures |
|
|
|
| ||||||||
Maximum (mbar) |
|
| 35 |
| 45 |
| 25 | |||||
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
**At 15°C and 1013
**Propane P.C.S. = 50.37 MJ/kg.
***Butane P.C.S. = 49.47 MJ/kg. Natural P.C.S. = 37.78 MJ/m3
Gas Section:Class | II2H3+ |
Rated Power kW (1) | 7,8 |
|
(1)Values in g/h refer to capacities with liquid gas (Butane, Propane).
It is the law that all gas appliances are installed by competent persons in accordance with the currect edition of the Gas Safety (Installation and Use) Regulations. It is in your interest and that of safety to ensure compliance with the law.
In the UK, CORGI registered installers work to a safe standard of practice.
The hob must be installed in accordance with BS6172:
Failure to install the hob correctly could invalidate the warranty liability claims and could lead to prosecution.
Electrical Connection
Electrical connection
The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.
WARNING: THIS APPLIANCE MUST BE EARTHED.
CONNECTING TO A 230-240V 50Hz SUPPLY ONLY.
The electrical installation should be carried out in compliance with the current electricity regulations by a qualified electrician. The cable should be routed so that it does not come into contact with the hob base by securing it to the cabinet side or rear wall.
It should be connected to a suitable double pole isolating switch having a contact separation of at least 3mm in all poles placed in a readily accessible position adjacent to the hob.
IMPORTANT:
The wires in the mains lead fitted to this appliance are coloured in accordance with the following code:
GREEN | - EARTH |
BLUE | - NEUTRAL |
BROWN | - LIVE |
9
