Care and Cleaning

Before cleaning or performing maintenance on your hob, disconnect it from the power supply.

To extend the life of the hob, it should be cleaned carefully and thoroughly on a frequent basis, keeping in mind the following:

·Do not use steam equipment to clean the appliance.

• The enamelled parts must be washed with warm water without using abrasive powders or corrosive substances which could ruin them.

• The removable parts of the burners should be washed frequently with warm water and soap, making sure to remove caked-on substances.

• On hobs with automatic ignition, the end of the electronic ignition device must be cleaned carefully and frequently,

making sure that the gas holes are not clogged.

•Stainless steel can be stained if it remains in contact with highly calcareous water or aggressive detergents (containing phosphorous) for an extended period of time. It is recommended that these parts be rinsed thoroughly with water and then dried well. It is also a good idea to clean up any spills.

Greasing the Taps

The taps may jam in time or they may become difficult to turn. If so, the tap itself must be replaced.

N.B.:This operation must be performed by a technician authorised by the manufacturer.

Troubleshooting

Before calling service for assistance, check through the following list, there may be nothing wrong.

First of all, check to see that there are no interruptions in the gas and electrical supplies, and, in particular, that the gas valves for the mains are open.

If the burner does not light or the flame is not uniform around the burner.

Check to make sure that:

•The gas holes on the burner are not clogged;

•All of the movable parts that make up the burner are mounted correctly;

•There are no draughts around the cooking surface.

If the flame does not stay lit on a model with the Flame Failure device.

Check to make sure that:

•You press the knob all the way in;

•You keep the knob pressed in long enough to activate the flame failure device.

•The gas holes are not clogged in the area corresponding to the flame failure device.

If the burner does not remain on when set to "Low". Check to make sure that:

•The gas holes are not clogged.

•There are no draughts near the cooking surface.

•The minimum has been adjusted correctly (see Installation section, "Minimum Regulation").

If the cookware is not stable.

Check to make sure that:

•The bottom of the cookware is perfectly flat.

•The cookware is centered correctly on the burner .

•The support grids have not been inverted.

If, despite all of these checks, the hob does not function properly and problem persists, call Hotpoint Service (see KEY CONTACTS, back page), informing them of:

-The type of problem.

-The abbreviation used to identify the model (Mod. ...) as indicated on the warranty.

IMPORTANT:

Never call upon technicians not authorized by the manufacturer, and refuse to accept spare parts that are not original.

8

Page 7 Page 9
Page 8
Image 8
Hotpoint G750, G760 manual Care and Cleaning, Troubleshooting, Greasing the Taps, If the cookware is not stable
Page 7 Page 9

G760, G750 specifications

Hotpoint has long been a trusted name in home appliances, and among its expansive lineup, the Hotpoint G750 and G760 stand out as two exceptional models in the category of washing machines. These appliances are designed for convenience, efficiency, and versatility, making them ideal choices for households seeking dependable laundry solutions.

The Hotpoint G750 and G760 feature advanced washing technologies that set them apart from competitors. One of the most notable aspects is the Energy Efficiency Rating, which highlights their ability to deliver superior cleaning results while minimizing energy consumption. This not only helps consumers save on utility bills but also reduces their carbon footprint, aligning with contemporary eco-friendly practices.

Both models are equipped with a variety of washing programs designed to cater to different fabric types and laundry needs. The gentle cycle is perfect for delicate items, while the heavy-duty cycle handles tougher stains with ease. The G750 and G760 also offer quick wash options, allowing users to reduce washing times for lightly soiled laundry, which is a significant convenience for busy lifestyles.

In terms of capacity, these washing machines provide ample space for large loads, accommodating families and individuals alike. The spacious drum design promotes optimal washing performance by allowing clothes to move freely, ensuring thorough cleaning without compromising on fabric care.

Moreover, the Hotpoint G750 and G760 incorporate innovative technologies such as the Anti-Stain system, which is engineered to tackle various stains without pre-treating. This feature utilizes a combination of specific drum movements and water temperature management to effectively combat stubborn marks while preserving the integrity of fabrics.

In addition to their performance features, these models boast a sleek and modern design, making them not only functional but also aesthetically pleasing. The intuitive control panel simplifies operation, providing users with easy access to select their desired settings without confusion.

Noise reduction technology is another characteristic worth noting. Both the G750 and G760 are designed to operate quietly, making them suitable for open living spaces or homes where noise may be an issue.

In summary, the Hotpoint G750 and G760 washing machines combine modern design with advanced technologies and thoughtful features aimed at enhancing the user experience. With their energy-efficient performance, versatile washing programs, and attention to stain removal, these models represent a smart investment for any household looking to streamline their laundry routine.
Top Page Image Contents