Manuals / Hotpoint / Kitchen Appliance / Cooktop

Hotpoint GW74 manual Installation And Operational Checks

Models: GW74

1 36

Download 36 pages 44.63 Kb

Page 34

Installation

INSTALLATION AND OPERATIONAL CHECKS

After installation, check for gas soundness. The supply pressure can be checked at the front left hotplate burner injector.

Fit the hotplate burner bodies and caps, pan supports and shelf shield(s). Referring to the instructions for use where necessary,

1.Check that the hotplate burners ignite and cross-light to all ports. Check for a steady flame on the low setting.

2.Check that the grill burner ignites and cross-lights to all ports and that the flames remain when the control is released 3 seconds later, Check for a steady flame on the low setting.

3.Check that with the main oven set to mark 9, the burner ignites at low rate, and then increases to full rate within 60 seconds. Leave the oven full on with the door closed for 10 minutes, and check that when the control is turned to the ‘Slow Cook’ setting that the flame reduces.

4.Check that with the top oven set to mark 8, the burner ignites and that the flames remain when the control is released 3 seconds later. Leave the oven full on with the door closed for 10 minutes, and check that when the control is turned to mark 1 that the flame reduces.

5.Check the operation of the oven timer and oven light(s).

Instruct the user on operation of the cooker.

On those models adjusted for use with LPG, it is normal for the oven and grill burners to burn with yellow tips.

34

Image 34

Hotpoint GW74 manual Installation And Operational Checks

Contents

To the Use To the InstallerThe information can be found on the rating plate then retain them for future referenceInstallation Instructions ContentsFor Your Safety Service InformationIntroduction For your Safety ALWAYSNEVER For your SafetyAUTOMATIC COOKING Oven Timer OperationGUIDANCE ON AUTOMATIC COOKING CLOCKFACE SYMBOLSTIMER FUNCTION BUTTONS AUTO COOKING PROGRAMMEOven Timer Operation SETTING THE TIME OF DAYSETTING THE MINUTE MINDER THE TIME OF DAY IS NOW SETAUTO COOKING PROGRAMMES Oven Timer OperationOven Timer Operation Step 5 Release all buttonsOTHER NOTES ON TIMER OPERATION Oven Timer OperationTO CANCEL AN AUTO COOKING PROGRAMME BEFORE THE COOK PERIOD HAS FINISHEDHotplate TO USE THE HOTPLATEHOW TO DEAL WITH A FAT FIRE SAFETY REQUIREMENTS FOR DEEP FAT FRYINGHotplate Grill GRILL PAN AND HANDLERELIGHTING THE BURNER TO USE THE GRILLGrill Main Oven TO USE THE MAIN OVENSTORAGE AND RE-HEATINGOF FOOD COLD START COOKINGROASTING OF LARGE POULTRY ‘COOK CHILL’ DISHESMain Oven Cooking Chart Main Oven Cooking Chart YEAST MIXTURESThe Slow Cook Setting USING THE ‘SLOW COOK’ SETTING FOR SLOW COOKINGTO USE THE TOP OVEN GUIDANCE ON USING THE TOP OVENTop Oven RELIGHTING THE BURNERTop Oven Cooking Chart Shelf Top Oven Cooking ChartYEAST MIXTURES REPLACEMENT OF OVEN LIGHT BULB Care and CleaningOVEN HEAT CLEAN LININGS OVEN DOORS GW74 onlyVitreous Enamel CLEANING METHODCOOKER FINISH PaintCHECK PROBLEMSomething Wrong with your Cooker Grill burnerPROBLEM Disposal of your productDisposal of old electrical appliances Something Wrong with your CookerMODEL NUMBERS GW74, C367G Category II2H3+ GB InstallationGAS SAFETY INSTALLATION & USE REGULATIONS LOCATIONG30 at 28-30mbar TECHNICAL DATAG20 at 20mbar G31 at 37mbarInstallation SPACE FOR FIXINGCOOKER HOODS 750mmCONVERSION FOR USE ON BUTANE G30 OR PROPANE G31 UNPACKING THE COOKERLEVELLING InstallationSTABILITY CHAIN CONNECTING TO GAS SUPPLYInstallation CONNECT TO A 230-240VA.C. SUPPLY ONLY Electrical ConnectionWARNING - THIS APPLIANCE MUST BE EARTHED IF THE FITTED PLUG IS REMOVEDINSTALLATION AND OPERATIONAL CHECKS InstallationPage Genuine Parts and Accessories After Sales ServiceRepair Service and Information Help Desk Extended Warranties