Description of the washing machine
GB
Control panel
ON/OFF
button
CHILD LOCK
button
DISPLAY
SPIN SPEED
button
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MEMORY |
|
| |
|
|
|
|
| FUNCTION | |||
Detergent dispenser drawer |
|
| ||||||
| WASH | button | ||||||
|
|
|
|
|
| buttons | ||
|
|
|
| CYCLE |
|
|
|
|
|
|
| SELECTOR |
| DELAY |
|
| |
|
|
|
| buttons |
|
|
| |
|
|
|
|
| START |
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
| button |
|
|
|
|
|
|
|
|
| ||
START/PAUSE
button with indicator light
TEMPERATURE
button
Detergent dispenser drawer: used to dispense deter- gents and washing additives (see “Detergents and laundry”).
ON/OFF button 
: press this briefly to switch the ma- chine on or off. The START/PAUSE indicator light, which flashes slowly in a green colour shows that the machine is switched on. To switch off the washing machine during the wash cycle, press and hold the button for approximately 3 seconds; if the button is pressed briefly or accidentally the machine will not switch off. If the machine is switched off during a wash cycle, this wash cycle will be cancelled.
WASH CYCLE SELECTOR buttons: used to set the desired wash cycle (see “Table of wash cycles”).
MEMORY button: press and hold the button to store a cycle with your own set of preferences in the memory of the machine. To recall a previously stored cycle, press the MEMORY button.
FUNCTION buttons: press the button to select the desired function. The corresponding indicator light on the display will switch on.
SPIN button 
: press to reduce or completely exclude the spin cycle - the value is indicated on the display.
TEMPERATURE button 
: press to decrease the tem-
perature: the value will be shown on the display.
CHILD LOCK button: to activate the control panel lock, press and hold the button for approximately 2 seconds. When the symbol is illuminated, the control panel is locked.
This means it is possible to prevent wash cycles from being modified accidentally, especially where there are children in the home. To deactivate the control panel lock, press and hold the button for approximately 2 seconds.
DELAY START button: press to set a delayed start time for the selected wash cycle. The delay time will be shown on the display.
START/PAUSE button with indicator light: when the gre- en indicator light flashes slowly, press the button to start a wash cycle. Once the cycle has started the indicator light will remain lit in a fixed manner. To pause the wash cycle, press the button again; the indicator light will flash in an orange colour. If the symbol 
is not illuminated, the door may be opened (wait approximately 3 minutes). To start the wash cycle from the point at which it was interrupted, press the button again.
Standby mode
This washing machine, in compliance with new energy sa- ving regulations, is fitted with an automatic standby system which is enabled after about 30 minutes if no activity is detected. Press the
8
