Hotpoint HDA105 About the dial cycles, Information, Safety, use detergent, Select HEATED DRY ON

Information

About the dial cycles.

Safety

OFF

PLATE

WARMER

(HEATED DRY ON)

ON

WATER

SAVER

Rinse & Hold (HDA150, HDA180, HDA200, HDA300, HDA330,

HDA900 and HDA930 only)

For rinsing partial loads that will be washed later. Do not

use detergent.

1 Make sure HEATED DRY OFF is selected.

Operating Instructions

RINSE & HOLD (HEATED DRY OFF)

	Be sure the door is unlatched.
2
	Slowly turn the Dial to RINSE & HOLD.
3
	Latch the door to start the cycle.
4

Start Delay (HDA900 and HDA930 only)

START

START DELAY

(HOURS)

2

Troubleshooting Tips

Customer Service

4

6

The START DELAY will allow you to delay the start time of any cycle not on the Dial automatically for up to 6 hours.

OFF

PLATE

WARMER

(HEATED DRY ON)

RINSE & HOLD (HEATED DRY OFF)

	Be sure the door is unlatched.
1
	Select the wash cycle and Option you want.
2
	Slowly turn the Dial to desired time. The CYCLE ON
3
	light will come on.
	Latch the door to start the cycle.
4

Plate Warmer (HDA200, HDA300, HDA330, HDA900 and

OFF	HDA930 only)
ON
WATER
SAVER	For warming clean dishes and serving plates. This cycle
	will take approximately 32 minutes.
			Load clean dishware to be warmed.
PLATE		1
WARMER
(HEATED DRY ON)RINSE & HOLD (HEATED DRY OFF)			Select HEATED DRY ON.
		2
			Be sure the door is unlatched.
		3
			Slowly turn the Dial to PLATE WARMER.
		4
			Latch the door to start the cycle.
10		5