How to operate your dishwasher
Door Latch | Cycle Indicator Dial |
(Unlocked) | (Turn to Start) |
r~~
JI | 1 |
STEP 1. Load your dishwasher with dishes, silverware, pots, pans, bowls, etc. according to instructions on pages 8 and 9.
STEP 2. Add detergent to the detergent dispenser. Make sure the Cycle Indicator Dial is at OFF position before adding detergent. (See pages 6 and 7.)
STEP 4. Select WATER HEAT Option.
—WATER HEAT—
mON OFF
●For POTS & PANS, NORMAL WASH and ENERGY SAVER cycles:
POTS & NORMAL ENERGY
PANS WASH SAVER
Use rinse aid agent to help prevent spotting. (See page 6.)
STEP 3. Select DRYING HEAT Option.
r — DRYING HEAT—
ON OFF
m
ON. The wash cycle will be extended while the dishwasher automatically heats the water for good washing and drying. The entering water must be at least 120”F.
OFF. The entering water must be at least 140?
STEP 5. Select the cycle and start the dishwasher.
a. Push selected cycle button. b. Latch the door.
ON. Turns the drying heater on for fast drying.
OFF. Turns the drying heater off to save energy. Dishes will dry naturally over a longer period such as overnight.
If you need your dishes sooner, open the dishwasher door after the cycle is complete to reduce the natural drying time.
Use of this option reduces the electrical energy used by this model approximately 8% for the NORMAL WASH cycle.
If your dishwasher drains into a food waste disposer, operate the disposer until it is empty before starting the dishwasher. (See Cycle Selection Hints at right.)
To obtain the benefits of a complete cycle, be careful that you do not turn the dial any further than necessary to start the dishwasher.
c. Slowly turn Cycle Indicator Dial to ON position to start the cycle.
●For RINSE HOLD cycle: a. Be sure door is unlatched.
b. Select DRYING
I | OFF ■ ■ OM |
dqlngwashing
a
Q
RINSE, HOLO,~’~,
c. Slowly turn Cycle Indicator Dial to RINSE HOL,D position.
d. Latch the door to start the cycle.
4
