Safety Information
About the dial cycles.
Rinse & Hold (HDA1100, HDA2000, HDA2020, HDA2030,
OFF | HDA2220, HDA3220, HDA3230, HDA3420 and HDA3430 only) |
ON | |
| |
| WATER SAVER |
Operating Instructions
PLATE WARMER
(HEATED DRY ON)
RINSE & HOLD (HEATED DRY OFF)
For rinsing partial loads that will be washed later. Do not
use detergent.
| Make sure ENERGY SAVER / HEATED DRY OFF is selected. |
1 | |
| Be sure the door is unlatched. |
2 | |
| Slowly turn the Dial to RINSE & HOLD. |
3 | |
| Latch the door to start the cycle. |
4 |
Start Delay (HDA3420 and HDA3430 only)
Troubleshooting Tips
START
HOURS 2 DELAY
4
6
OFF
PLATE WARMER
(HEATED DRY ON)
RINSE & HOLD (HEATED DRY OFF)
The HOURS DELAY will allow you to delay the start time of any cycle not on the Dial automatically for up to 6 hours.
| Be sure the door is unlatched. | |
1 | ||
| Select the wash cycle and option you want. | |
2 | ||
| Slowly turn the Dial to desired time. The DELAYED | |
3 | ||
START light will come on. | ||
| ||
| Latch the door to start the cycle. | |
4 |
Service
OFF
PLATE WARMER
(HEATED DRY ON)
ON
WATER
SAVER
Plate Warmer (HDA2220, HDA3220, HDA3230, HDA3420 and
HDA3430 only)
For warming clean dishes and serving plates. This cycle will take approximately 32 minutes.
1 Load clean dishware to be warmed.
Customer
RINSE & HOLD (HEATED DRY OFF)
2 Select HEATED DRY / HEATED DRY ON.
3 Be sure the door is unlatched.
4 Slowly turn the Dial to PLATE WARMER.
5 Latch the door to start the cycle.
10