Hotpoint dimensions HDA2000G - Hotpoint Built-InDishwasher, Dishwasher Dimensions in inches

HDA2000G - Hotpoint Built-In Dishwasher

Dishwasher Dimensions (in inches)

25-3/4

MAX. 24

Installation Information (in inches)

Countertop

Wood Insert Cut-Out Dimensions (in inches)

23-3/8*

				This wall area
	90°			must be free of
				pipes or wires
24"
			4	4
		MIN.
				4

90°

Electrical

wiring is

3" from cabinet

Door insert

Detail D

APanel Thickness

3/4

Front

of

Panel

34MIN. adj. to 35

24-3/4

Hot	5	5
water	34-1/2±1/4"
line on		6
	Underside 6
left	of countertop
	to floor

Electrical wiring on right

Access insert

B

C

1-1/2

1/2

21-1/2

3-1/4

4 (Adjustable)

2		Plumbing and electrical
		service must enter
		inside shaded area
	19" MIN. from wall		24" From wall

24" MIN.

				1/4
				Panel
Models/Kits	A	B	C	Thickness
GPF325 Kit	18-7/8”	23-9/16”	3-11/16”	1/4”
			3-3/4” to
GPF375 Kit	18-15/16”	23-5/8”*	4-1/4”**	3/4”

Electrical Rating
Voltage AC	120
Hertz	60
Total connected load amperage	8.6
Calrod® heater watts	500
For use on adequately wired 120-volt, 15-amp
circuit having 2-wire service with a separate
ground wire. This appliance must be grounded
for safe operation.

Note: Dishwasher must not be installed more than 10' from sink for proper drainage. All plumbing and electrical work must be in accordance with local codes. Dishwasher includes drain hose and leveling legs.

Installation Information: Before installing, consult installation instructions packed with product for current dimensional data.

*Bottom of panel must be notched 1-1/2" x 1/2" to clear access panel. (See illustration above)

**Adjustment required to match adjcent cabinets fronts due to leveling leg adjustment, 4" nominal.

Specification Created 1/02

		Listed by
		Underwriters
As an ENERGY STAR® Partner,	R	Laboratories
GE has determined that this product
meets the ENERGY STAR®
guidelines for energy efficiency.