Hotpoint HDA3540N dimensions HDA3500/3540N - Hotpoint Built-InDishwasher, Electrical Rating

HDA3500/3540N – Hotpoint Built-In Dishwasher

Dishwasher Dimensions (in inches)

25-3/4

MAX. 24

23-3/8

24-3/4

34MIN. adj. to 35

Door insert

Access insert

B

APanel Thickness

3/4

Front

of

Panel

C

1-1/2 1/2

1/4

									This wall area
									must be free of
		90°							pipes or wires
				24"
							4			4
			MIN.
									4
Hot							5			5
water
	34" to 34-3/4"				6					6
line on	Underside
left	of countertop
	to floor
					2			Plumbing and electrical
									service must enter
									inside shaded area
						19" MIN. from wall				24" From wall

Countertop

90°

Electrical

wiring is

3" from cabinet

Electrical wiring on right

21-1/2

3-1/4	4 (Adjustable)
Electrical Rating
Voltage AC		120
Hertz		60
Total connected load amperage		8.6
Calrod® heater watts max		500

For use on adequately wired 120-volt, 15-amp circuit having 2-wire service with a separate ground wire. This appliance must be grounded for safe operation.

When using GPF325 1/4" custom dishwasher door and access panel kit.

When using GPF375 3/4" custom dishwasher door and access panel kit.

				Panel
Kit	A	B	C	Thickness
GPF325	18-7/8"	23-9/16"	3-11/16"	1/4"
GPF375	18-15/16"	23-5/8"*	4-1/4" to	3/4"
			3-3/4"**

*Bottom of panel must be notched 1-1/2" x 1/2" to clear across panel

**Adjustment required to match adjacent cabinet fronts due to leveling leg adjustment, 4" nominal

24" MIN.

Note: Dishwasher must not be installed more than 10 feet from sink for proper drainage. All plumbing and electrical work must be in accordance with local codes. Dishwasher includes drain hose and leveling legs.

Installation Information: Before installing, consult installation instructions packed with product for ­current dimensional data.

Specification Created 4/07

As an Energy Star® partner, GE has determined that this product meets the Energy Star guidelines for energy efficiency.

Listed by Underwriters Laboratories

450153