RECOMMENDATIONS AND SUGGESTIONS

Using your new Cooker Hood is very simple. Nevertheless, to get the best results it is important that you read this manual thoroughly before installing and using your appliance for the first time.

INSTALLATION

•All installation and repairs should be carried out by a qualified technician in accordance to regulations in force.

•The manufacturer will not be held liable for any damage resulting from incorrect or improper installation.

•After having removed the packaging, check the condition of the appliance, if in any doubt, do not use and contact Hotpoint Service (see Key Contacts, back page).

•The minimum safety distance between the hob and the extractor hood is 650 mm.

•Check that the mains voltage corresponds to that indicated on the rating plate fixed to the inside of the hood.

•Connect the extractor to the exhaust flue through a pipe of minimum diameter 120 mm. The route of the flue must be as short as possible.

•Do not connect the extractor hood to exhaust ducts carrying combustion fumes (boilers, fireplaces, etc.).

•If the extractor is used in conjunction with non-electrical appliances (e.g. gas burning appliances), a sufficient degree of ventilation must be guaranteed in the room in order to prevent the backflow of exhaust gas. The kitchen must have a suitable vent to the outside of the building, so that clear fresh air can circulate through the kitchen.

USE

•The extractor hood has been designed exclusively for domestic use to eliminate kitchen smells.

•Never use the hood for purposes other than for which it has been designed.

•Never leave high naked flames under the hood when it is in operation.

•Adjust the flame intensity to direct it onto the bottom of the pan only, making sure that it does not engulf the sides.

•Deep fat fryers must be continuously monitored during use: overheated oil can burst into flames.

•When frying, never leave the pan unattended.

•The hood should not be used by children or persons not instructed in its correct use.

MAINTENANCE

•Switch off and unplug the appliance from the mains supply before carrying out any cleaning or maintenance work.

•Clean regularly (see Care and Cleaning section), build up of dirt and grease could cause a fire hazard.

GB

 

3

Page 2 Page 4
Page 3
Image 3
Hotpoint HDI90X manual Recommendations and Suggestions, Installation, Use, Maintenance
Page 2 Page 4

HDI90X specifications

The Hotpoint HDI90X is a versatile and stylish integrated dishwasher designed to meet the needs of modern households. Known for its excellent performance and array of features, this dishwasher combines efficiency with cutting-edge technology, making it a valuable addition to any kitchen.

One of the standout features of the Hotpoint HDI90X is its generous capacity. With room for up to 16 place settings, it is ideal for larger families or those who frequently entertain. The interior is intelligently designed, with adjustable racks and folding tines that allow for flexible loading, accommodating everything from delicate glassware to bulky pots and pans.

The HDI90X is equipped with Hotpoint's innovative Active Care technology, which focuses on delivering a deeper clean. This feature helps eliminate stubborn stains, ensuring that dishes come out sparkling clean, even after the most challenging cycles. The use of high-pressure water jets ensures that every corner of the dishwasher is reached, enhancing the cleaning efficiency.

Another notable characteristic of the HDI90X is its A+++ energy rating. This makes it an energy-efficient choice, consuming less power without compromising performance. Pairing this with a low noise level of just 43 dB, the dishwasher operates quietly, allowing you to run it at any time without disturbing your household.

The Hotpoint HDI90X also features a range of specialized wash programs, including a quick wash option that can clean lightly soiled dishes in as little as 30 minutes. The eco-friendly settings optimize water and energy use, making it suitable for environmentally conscious users. Additionally, the delay timer function allows you to set the dishwasher to start at a time that is most convenient for you.

Furthermore, the dishwasher incorporates a user-friendly LED display, providing clear information on cycle times and options. The sleek stainless steel finish adds a modern touch to your kitchen, while the integrated design allows it to blend seamlessly with your cabinetry.

In conclusion, the Hotpoint HDI90X is a powerful and efficient integrated dishwasher that delivers exceptional cleaning performance, ample capacity, and advanced features. With technologies designed for convenience and sustainability, it stands out as a top choice for those seeking a reliable and stylish appliance for their kitchen.
Top Page Image Contents